S |
M |
T |
W |
T |
F |
S |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
Forums10
Topics38,934
Posts550,873
Members14,460
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Jan 2004
Posts: 6,996 Likes: 493
Sidelock
|
OP
Sidelock
Joined: Jan 2004
Posts: 6,996 Likes: 493 |
I'm planning on hunting my 16 gauge Evans double for pheasants this year. I'm a bit at a loss for what might be a good load in a 16 as I have never hunted with one.
Currently, I'm loading 80 gr of Goex Cartridge and 1 oz of lead (5s normally). I put about 1/4" of a lubed Circle fly wad between them. The case is a Win AA that is cut to 2 9/16" and roll crimped.
I really need to pattern this but is a 1oz load of lead reasonable for a 16?
BTW, the right barrel is proofed as "17" and the left barrel is stamped 16B 18M Not for ball
So I take it that I have a pretty open right barrel and a fairly tight left barrel.
Brent
_________ BrentD, (Professor - just for Stan) =>/
|
|
|
|
Joined: Jan 2002
Posts: 2,307
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 2,307 |
Try the "Vintagers" low pressure loads from PolyWad in Macon, Georgia. I have used them for several years and like them in a number of 1890-1935 guns, all 16's. They have a nice web site.
|
|
|
|
Joined: Jan 2002
Posts: 2,522
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 2,522 |
Yes the one ounce load is enough. I had no problem at all in S.Dakota with a 20ga and 1oz loads so the 16 will be equally good with it. Just don't try to make open chokes do the job full choke was intended to solve. My old German 16ga (1912 or so gun) has a service load stamped on the barrels which is exactly a 1oz load for the 2 9/16" chambers.
Last edited by Jerry V Lape; 08/04/07 12:17 AM.
|
|
|
|
Joined: Feb 2004
Posts: 13,880 Likes: 16
Sidelock
|
Sidelock
Joined: Feb 2004
Posts: 13,880 Likes: 16 |
I'm with Jerry. I used a 20g with 1 oz modern loads the last 2 yrs in SD on phez to great success. I also used a damascus Parker 12g with 1 oz/#5/1150fps loads on SD phez with good results.
|
|
|
|
Joined: Nov 2002
Posts: 9,383 Likes: 2
Sidelock
|
Sidelock
Joined: Nov 2002
Posts: 9,383 Likes: 2 |
I would go with low-recoiling Eley 'Grand Prix' 26.5gm load with #6 shot pushed by fibre wad. It's available in: BB,3,4,5,7. Avg. V2m 390m/s Avg. GP 536bar. You can consult folks at 16ga.com, but I doubt they have something more balanced to offer. PS. It is suitable to guns with 65mm chambers.
|
|
|
|
Joined: Jan 2002
Posts: 2,522
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 2,522 |
I should have added that if you are looking for commercial ammo, I have had great performance out of RST 16ga loads which come in both 7/8oz and 1oz loads. And the pressures are low. I like the 7/8oz because my 16ga is very light and the lighter load is a bit easier on me and the old wood. Quail and Huns work well with the lighter loads.
|
|
|
|
Joined: Jan 2002
Posts: 11,464 Likes: 133
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 11,464 Likes: 133 |
Brent, the "not for ball" tells you when the gun was made (between 1875-87), but doesn't tell you anything about choke. Neither do the 16 and the 17, although they do tell you that the original bore diameter on the 17 barrel is a few thousandths tighter than that on the 16 barrel. But you still have to measure the constriction at the muzzle, in relation to the bore diameter, to determine how much choke you have. And given the age of that gun, it's quite likely that the barrels have been honed and that bore and choke diameters no longer match what's marked.
An ounce of shot would have been the maximum load for which that gun was intended. Your concern, however, is with the pressure generated by that load. If I were reloading for a gun of that vintage, I'd want to stay under 8,000 psi. The safe thing to do, if you're not working up reloads to a "book" formula that tells you pressure, is to shoot factory shells designed for short-chambered guns. Several are suggested above.
|
|
|
|
Joined: Jan 2004
Posts: 6,996 Likes: 493
Sidelock
|
OP
Sidelock
Joined: Jan 2004
Posts: 6,996 Likes: 493 |
I know Larry. The 16B, 18M tells me I have two gauges of choke on the left barrel. It is also the barrel that is stamped Not for ball. The other barrel is not so stamped but bears simply a 17 - which I consider to be the bore diameter and that there is choke in that barrel.
I'm working up loads with blackpowder of course. Frankly, if there are books out there with such loads they would be next to useless given the batch to batch variation in black powder.
Perhaps I'll load an 1 oz for pheasants and 7/8 oz for clays. I would like to keep the loads ballistically similar though. That may take a bit of extra work. Brent
_________ BrentD, (Professor - just for Stan) =>/
|
|
|
|
Joined: Feb 2002
Posts: 2,859
Sidelock
|
Sidelock
Joined: Feb 2002
Posts: 2,859 |
Brent Get a Dixie Gunworks Catalogue, in the back is all sorts of useful information, including BP reloading recomendations. Steve
Approach life like you do a yellow light - RUN IT! (Gail T.)
|
|
|
|
Joined: Dec 2001
Posts: 12,743
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 12,743 |
16ga = .662" 17ga = .649" 18ga = .637" Prior to 1887 there were no sub-divisions. The right bbl would take a 17ga plug from both breech (bore dia) & muzzle (choke dia) but not a 16ga plug The left bbl would take a 16ga plug from breech & an 18ga plug from muzzle. The actual constriction was not measured so muzzle dia could have been anything from .637" up to just under .649". Standard practise of the day I believe was to use a ball of dia about bore size -.010". Trying to fire a .652" dia ball down the left bbl would most likely have resulted in a "Lifted" choke (or worse). However a ball which would clear the .637" dia could be safely fired, only question would then be accuracy.
Miller/TN I Didn't Say Everything I Said, Yogi Berra
|
|
|
|
|