Miraculously, I remembered how it all went back together...
Once I got it buttoned back up, all function tests were 100%. All three barrels now cocked upon opening, all the indicators showed, rifle sight popped up when selected, and it snapped closed like a bank vault. Time to try shooting it! One problem, 7x65R is not available on the shelf at "Canadian Tire". I did have lots of 16ga however (it is my favourite gauge), so off to the pattern board.
Shotgun barrels worked as expected. Triggers were crisp and fairly heavy. Chokes seemed fine, patterns where I expected (maybe a tad low).
My activity at the board drew over a guy I know who was immediately interested in the gun. I was whining about not having any rifle shells for it, and he says "I know a guy...yada yada yada". so after a phone call, a 15 minute drive, and $60, I end up with this.
Which led to this...
Which resulted in this! Not one scope adjustment (100yds)
These were shot from a rest, using the set trigger, cold clean barrel every time. 173grain Sellier and Bellot SPCE bullets. Happy Happy Happy
