Originally Posted By: eightbore
The screws can't be made right, considering the width of the slots. The hand screw is especially bad. The hinge pin is a mess. I would insist on some paper on this gun, paper on every phase of the redo. The stock can be made 14" or better with a proper pad, if there is a proper pad of a gun of this era. How about those colors.


You cant even see the hand pin. The hand pin is underneath the trigger guard tang. The only part of the hand pin you can see is the end of it thats filed flush with the rear of the top tang, hardly an indication that its a mess. The Breech pin is underneath the top lever/or top tang. That is called the breech pin.