At one point I had a chart which gave the bilk densities for the powders then available. Since it was published so many powders have been added that it would be virtually useless today. A close idea can be derived by simply looking at how many grains of powder a given bushing will hold. For instance, the same bushing will hold 20 grains bullseye, 15 grains Red-Dot, 14 grains Green Dot or 19.5 grains Unique.
Obviously, of these four powders, Green-Dot & Red-Dot are the bulkiest & Bullseye & Unique the densest. That same measure will also hold 16 grains 700X or 17.5 grins of PB.
This is an old chart, actually from a Lee powder dipper set, so no load data given, but you get the idea.
Last edited by 2-piper; 07/20/19 10:09 AM. Reason: Correct a Typo, listed Unique twice & omitted Green dot
