|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
|
|
|
|
1
|
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
|
30
|
|
|
|
|
|
|
|
|
1 members (WJW),
402
guests, and
10
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums10
Topics39,558
Posts562,774
Members14,594
| |
Most Online9,918
Jul 28th, 2025
|
|
|
|
Joined: May 2010
Posts: 1,330 Likes: 109
Sidelock
|
OP
Sidelock
Joined: May 2010
Posts: 1,330 Likes: 109 |
Has anyone had personnel experience of machining Buffalo Horn on a mill? I say personnel experience because my interest is in the technical aspects of speeds and feeds.
|
|
|
|
|
Joined: Dec 2001
Posts: 7,321 Likes: 629
Sidelock
|
|
Sidelock
Joined: Dec 2001
Posts: 7,321 Likes: 629 |
Sharp cutters and keep things moving. It smells terrible and burns if the feed is too slow. I just made a grip cap on the CNC this Spring out of horn and seem to recall I used feeds for aluminum and a spindle speed of 800 rpm. Hope that helps.
Steve
Firearms imports, consignments ![[Linked Image from i.imgur.com]](https://i.imgur.com/Ez9oz9Rl.jpg)
|
|
|
|
|
Joined: May 2010
Posts: 1,330 Likes: 109
Sidelock
|
|
OP
Sidelock
Joined: May 2010
Posts: 1,330 Likes: 109 |
Sharp cutters and keep things moving. It smells terrible and burns if the feed is too slow. I just made a grip cap on the CNC this Spring out of horn and seem to recall I used feeds for aluminum and a spindle speed of 800 rpm. Hope that helps.
Steve
Thanks Steve do you recall cutter diameter you were using at the 800 rpm?
|
|
|
|
|
Joined: Dec 2001
Posts: 7,321 Likes: 629
Sidelock
|
|
Sidelock
Joined: Dec 2001
Posts: 7,321 Likes: 629 |
1/4" endmill. Horn is pretty forgiving to machine really, I have done a fair bit of it and never ran in to issues.
Steve
Firearms imports, consignments
|
|
|
|
|
Joined: May 2010
Posts: 1,330 Likes: 109
Sidelock
|
|
OP
Sidelock
Joined: May 2010
Posts: 1,330 Likes: 109 |
|
|
|
|
|
|
|
