doublegunshop.com - home Forums General Discussion DIY Gunsmithing @ doublegunshop.com Machinery in the Shop

I cut my chokes on my lathe, you will want at least a 13/40 for that.

The small bench top mill/lathes are handy for small stuff., turning screws and pins etc.

A full size bridgeport/lathe gives you tons of options but if you need that I can not say.

Pro-tip....if you can find someone selling out a whole small shop or selling tooling combined you are way ahead. Tooling can easily cost more than a machine. I bought a pile of machinery when first set my shop up, sold off what I did not need and more than covered my initial purchase price.