S |
M |
T |
W |
T |
F |
S |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
6 members (SKB, MattH, LRF, Drew Hause, 2 invisible),
575
guests, and
2
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums10
Topics38,931
Posts550,839
Members14,459
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Jan 2006
Posts: 9,527 Likes: 354
Sidelock
|
Sidelock
Joined: Jan 2006
Posts: 9,527 Likes: 354 |
The 1913 Lefever Arms Co. catalog gives recommended loads in 12g going up to 3 1/2 Drams Black or Equivalent of Bulk or Dense Smokeless powders with 1 1/4 oz. shot, or 28 grains of Laflin & Rand Dense Infallible. Comparative Loads from the Lefever Arms Co. in The Outdoorsman's Handbook, 1920 http://books.google.com/books?id=Lr1DAQAAMAAJ&pg=PA138&lpgThe standard pre-WWI U.S. 12g Field and Target load was 1 1/8 oz. shot with 3 Dr. Eq. (1200 fps) Dense (Ballistite or Infallible) Smokeless in a 2 3/4 case with a transducer pressure of 8,500 - 10,000 psi. The 1 1/4 oz. with 3 1/4 Dram Equivalent (1220 fps) of Bulk (DuPont, E.C., Schultze) Smokeless in a 2 5/8 or 2 3/4 case was still popular, with a modern transducer pressure of 8000 - 9500 psi.
|
|
|
|
Joined: Feb 2008
Posts: 11,468 Likes: 487
Sidelock
|
Sidelock
Joined: Feb 2008
Posts: 11,468 Likes: 487 |
Keith,
My gun #59122, has Twist barrels, dolls head, and cocking indicators. Frame is stamped "DS". Sideplates stamped "LEFEVER ARMS CO.,". No address line. Forend has no escutcheon or metal forend tip. Buttstock has POW grip, no flutes at comb, and early Nitro Special checkering pattern. LOP=14" to unmarked buttplate( stock is straight cut, so maybe a replacement). Barrel Flats each stamped "I". Left tube stamped "59122 H". Forend hanger flat between barrels stamped "59122" Forend hanger lug stamped "I" and perpendicular "P".
These indicators shout ITHACA to me. Your mileage may vary,
John
John, thanks for the information. Sorry to disagree, but the only real indicator of Ithaca involvement I see there is the stamp on the forend hanger. The 1907 59xxx serial number is a long way from 1916 or later. I personally don't subscribe to the notion that unfinished serial numbered frames were held back for 9 or more years, and have seen zero evidence for that theory to explain anomalies or unusual features in Lefever guns. And the lack of flutes at the nose of the comb became common in lower grade guns such as the H and I grades as well. I don't know what to make of Nitro Special style checkering, other than the possibility that a 113 year old field grade gun certainly could have been re-checkered, or even re-stocked at some point. And I will say that I have never heard of that as an indicator of Ithaca assembly. Having not seen your stock, or the straight cut butt and unmarked buttplate, I tend to think this stock has had some work done to it in the many years since it was built. All of the DS grade guns I have seen that have the twist barrels, dolls head rib extension, cocking indicators, etc., have had the same LAC monogram buttplate as the H Grade and higher guns.
A true sign of mental illness is any gun owner who would vote for an Anti-Gunner like Joe Biden.
|
|
|
|
Joined: Feb 2008
Posts: 11,468 Likes: 487
Sidelock
|
Sidelock
Joined: Feb 2008
Posts: 11,468 Likes: 487 |
I also checked the detailed notes I made on my own twist barreled DS grade guns. Neither has Nitro Special style checkering. Curiously, one has the same 59xxx serial number range as your gun. My notes say it has a light H stamp under the right barrel near the serial number, and all numbers match. And the other gun has a serial number of 49xxx on the frame, barrels, etc. But it also has the same 49xxx serial number on the inside of the sideplates, and the left sideplate also has a second 59xxx serial number. It seems an odd coincidence that numbers in the 59xxx range are associated with your gun, and both of mine. I wish I had recorded details on the other twist barreled DS grades I've seen, especially the serial numbers. It kind of makes me wonder if there was a shortage of non-dolls-head frames to fill orders for DS grade guns during that period of time, so guns with H grade features were stamped DS to fill orders. Just a possible theory, with no evidence. Those long lost Lefever factory records make things difficult, and lead to a lot of confusion.
Based upon literally thousands of sales and auctions of Lefevers I've watched over the years, the percentage of DS grade guns with twist barrels and other H grade features is certainly very small. I was going to return the first one I bought, because it was advertised as having fluid steel barrels. This was before I had began to appreciate the craftsmanship and artistry of twist and Damascus barrels, and I wanted a shooter... and we all know that twist and Damascus guns are dangerous time-bombs that should never be shot! I spoke with Robert Elliot about it, and he suggested that I should keep it because they are a rare and interesting variation. I'm glad I took his advice.
A true sign of mental illness is any gun owner who would vote for an Anti-Gunner like Joe Biden.
|
|
|
|
Joined: May 2015
Posts: 355 Likes: 11
Sidelock
|
Sidelock
Joined: May 2015
Posts: 355 Likes: 11 |
I have always felt that far too many guns with unusual features are wrongly attributed to Ithaca assembly.
This. For all the reasons you gave, plus the company was struggling, and putting anything together to get it out the door. After Dan left in 1900, the company ramped up production numbers, and most was DS or H. There are all kinds of variations...even an H with Krupp barrels. Among a circle of collectors who track Lefever info, the "Ithaca hallmarks" are only present on less than 2% of the guns we have noted. NDG
|
|
|
|
Joined: Jan 2006
Posts: 9,527 Likes: 354
Sidelock
|
Sidelock
Joined: Jan 2006
Posts: 9,527 Likes: 354 |
re: loads for Lefevers Dr. Williamson way likely pushing the envelope October 19, 1895 Sporting LifeDr. J.L. Williamson, of Milwaukee, Wis., has just purchased a new gun of more than ordinary proportions. The Doctor was quite taken with Carver's Cashmore gun, having long barrels and shooting a big load in a 3 1/4 inch shell; but desiring to give the American gunmakers a chance he ordered a gun from the Lefever Arms Company, of Syracuse, N. Y. but at the same time rather doubted their ability to make such a weapon as he desired. However, the gun was furnished and Dr. Williamson killed 79 out of 80 live birds on one trial, and 74 out of 75 targets, part being doubles. The gun is a Lefever, 12-gauge, weighing 8 1/4 pounds, 32-inch barrels, and chambered for a 3 1/4 inch shell, and guaranteed to stand 4 1/2 Drams of E.C. powder, which is the amount of powder which he uses. (1 1/4 oz. with 3 1/2 Dram Schultze was about 12,000 psi. Schultze pressures were somewhat lower than E.C.) Dr Williamson did not compete in the 1896 GAH at Live Birds, but held the E.C. Cup that year; his gun was not listed https://digital.la84.org/digital/collection/p17103coll17/id/47243/rec/7 https://digital.la84.org/digital/collection/p17103coll17/id/46882/rec/5 At some point he must have had some sense "kicked" into him, or destroyed his Lefever, as he used a Cashmore with 1 1/4 oz. 3 1/2 Dr. Eq. DuPont Bulk at the 1897 GAH at Live Birds, and was one of 5 competitors with 24 kills https://digital.la84.org/digital/collection/p17103coll17/id/45852/rec/4 https://digital.la84.org/digital/collection/p17103coll17/id/46498/rec/3
|
|
|
|
Joined: Jan 2002
Posts: 13,386 Likes: 1324
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 13,386 Likes: 1324 |
At some point he must have had some sense "kicked" into him, or destroyed his Lefever Or ....... he may have shot the loads on paper and seen how much nicer patterns the 3 1/2 dr. load shot compared to the 4 1/2 dr. load. 1500 fps, compared to 1275 fps, does nothing to improve the pattern of a lead shot load. SRH
Last edited by Stan; 11/16/20 08:24 AM.
May God bless America and those who defend her.
|
|
|
|
Joined: Feb 2008
Posts: 11,468 Likes: 487
Sidelock
|
Sidelock
Joined: Feb 2008
Posts: 11,468 Likes: 487 |
Thanks Nudge. However, I did mention the chronic financial difficulties of the Lefever Arms Co. as perhaps the biggest reason why I find it hard to believe most of what I have read concerning the number of Lefever shotguns assembled by Ithaca.
In the years after Dan Lefever's departure, leading up to the sale of the Lefever Arms Co. and inventory by the Durston family, sales averaged only around 2500 guns per year. It wouldn't make any economic sense for a gun company in those times and circumstances to tie up several years worth of production in parts inventory. But a lot of things about Lefever guns are hard to explain, so I guess it is just easy to suggest that any guns with unusual features are the result of Ithaca production. That might wash if we saw the same sort of thing with a goodly number of Ithaca's own doubles. From what I have observed, a good number of Lefevers will have barrels or other features from higher grade guns than what is stamped on the frame. I think some of this may result from customer special requests, and some of it might be simply using parts on hand to fill orders... but only if the change was a slight upgrade. This practice of never giving a customer anything less than he paid for might explain the existence of this small number of DS grade guns that have many H grade features. And I mentioned the possibility that there may have been a temporary shortage of non-dollshead DS frames... but that is also only a guess. In many cases, Lefever guns seem to be almost semi-custom, versus the cookie-cutter production seen from their competition.
A true sign of mental illness is any gun owner who would vote for an Anti-Gunner like Joe Biden.
|
|
|
|
Joined: Jan 2002
Posts: 104 Likes: 1
Sidelock
|
OP
Sidelock
Joined: Jan 2002
Posts: 104 Likes: 1 |
At the risk of heading down the rabbit hole again (I looked at the old threads on the topic) did anyone ever definitively prove what the "S.B & Co G" markings below mean? They are on the bbls of the 16 ga H grade Lefever from the original post. S.B & Co G
Last edited by K Crowley; 11/17/20 02:58 PM.
|
|
|
|
Joined: Jan 2006
Posts: 9,527 Likes: 354
Sidelock
|
Sidelock
Joined: Jan 2006
Posts: 9,527 Likes: 354 |
The rabbit hole is deep, and confusing We've found these marks on U.S. doubles, and we have good evidence the marks do NOT mean Sanderson Bros. made the tubesS.B. & Co - Sanderson Brothers & Co.; follow by G Gautier? In 1882, Gautier Steel was a division of Cambria Iron Co., Allegheny Co., PA. Dudley G. Gautier was president of the Philadelphia Steel & Forging Co. and D.G. Gautier & Co. was listed as an agent for both Sanderson Brothers & Co. and Tacony Iron Works (1881-1910) of Philadelphia. T Tacony? P Sandersons Pittsburgh Works? C Sandersons Cumberland (Maryland) Works? or Carpenter Steel Company, establish in 1889 in Reading, PA which used a C to mark their bar steel? Here is an Ithaca Flues with the same mark Long version is here https://docs.google.com/document/pub?id=17ixogftgITEblNUWtmFBv96ZvgjK6eFell8GsAWd-KI
|
|
|
|
|