S |
M |
T |
W |
T |
F |
S |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
Forums10
Topics38,892
Posts550,537
Members14,454
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Dec 2001
Posts: 7,081 Likes: 462
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 7,081 Likes: 462 |
I polish to at least 400 grit...and then keep my rustings very short and apply pilkingtons thinnly and evenly so the rust is very fine. It makes for a lovely finish. Steve
|
|
|
|
Joined: Jun 2002
Posts: 2,278 Likes: 94
Sidelock
|
Sidelock
Joined: Jun 2002
Posts: 2,278 Likes: 94 |
"battle - so somehow you get the rust bluing to increase the smoothness of the finish? I don't know how to do that"
Brent........I didn't say that. I said that 320 isn't scratchy.
Best!
|
|
|
|
Joined: Feb 2004
Posts: 13,880 Likes: 16
Sidelock
|
Sidelock
Joined: Feb 2004
Posts: 13,880 Likes: 16 |
I too, have gone down to 400 and liked the results. But I haven't tried finer grits. I'll have to give a sample a try.
|
|
|
|
Joined: Jan 2004
Posts: 6,986 Likes: 490
Sidelock
|
Sidelock
Joined: Jan 2004
Posts: 6,986 Likes: 490 |
battle, it is in my eyes. Brent
_________ BrentD, (Professor - just for Stan) =>/
|
|
|
|
Joined: Feb 2003
Posts: 1,641 Likes: 16
Sidelock
|
OP
Sidelock
Joined: Feb 2003
Posts: 1,641 Likes: 16 |
I just spoke with a very helpful and informed rep from Brownells. He said the solution they market under their own name is very similar to Pilkingtons (and about 1/3 the price). He also suggested using a quick acting agent, like Mark Lee (which I usually use for small parts) for the first pass over that problem area because it etches the metal slightly, then going back and finishing up with the Pilkingtons. Thanks to all for the suggestions!
[IMG]
|
|
|
|
Joined: Feb 2004
Posts: 13,880 Likes: 16
Sidelock
|
Sidelock
Joined: Feb 2004
Posts: 13,880 Likes: 16 |
Gil, In reading some of Oscar's work on damascus coloring, he indicates that the Radio Shack circuit board etch (ferric chloride?) is a mild etching solution on steels. It also 'wets' out very evenly in my experience and is somewhat 'viscous'.
Last edited by Chuck H; 10/03/07 12:52 PM.
|
|
|
|
Joined: Jun 2002
Posts: 2,278 Likes: 94
Sidelock
|
Sidelock
Joined: Jun 2002
Posts: 2,278 Likes: 94 |
"battle, it is in my eyes. Brent" Brent.........then scratch them!
|
|
|
|
Joined: Jan 2002
Posts: 2,307
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 2,307 |
Gil, I have used the Mark Lee product, the Pilkington's product, and the Brownells' Dicropan product. Which Brownells' product are you referring to that they say is very similar to Pilkington's and at about 1/3 the price. Thanks.
|
|
|
|
Joined: Apr 2007
Posts: 110
Sidelock
|
Sidelock
Joined: Apr 2007
Posts: 110 |
HI Gil: I'd be a bit cautious about the Brownell's product they claim is simialr to Pilkington's. If they are talking about their Classic Rust Blue Solution, it is more aggressive than P's. They're right, it's much cheaper, but I didn't much care for the results when I tried it. FWIW. Craig
|
|
|
|
Joined: Feb 2003
Posts: 1,641 Likes: 16
Sidelock
|
OP
Sidelock
Joined: Feb 2003
Posts: 1,641 Likes: 16 |
Larry: It's their Classic Rust Blue. I wonder if it is a fairly new product; I haven't noticed it before.
[IMG]
|
|
|
|
|