Just had a nice conversation with Mike on the phone. Measuring to the top of both sides gives us a difference in sight heights of ~.150" height over the bores. Extrapolating this difference out to 50 yds says the bores are pointing about 12" above the point of aim. So Mike in his shooting had the bullets impact about 14" above PoA. The rear blade is marked 100 yds.

Given this we agreed that working on the sight picture, trying a lighter bullet, and maybe some increased velocity will work to refine the position of the group on the target. We feel good with the results.

Last edited by LRF; 03/20/22 06:07 AM.