.....and the rear peep sight ( I wanted to have this sight, when in its lowest position and given the front sight height, be on at 100 yards. This I achieved very nicely.....
By way of sure luck I may add!
Let me explain. The overall issue with the sights, root cause (sounds a bit like Kamala LOL) is that the front sight is not as high as I thought I had made it. And also the sight best sight picture for me when I align the leaf and front is some what different then I had first thought way back in the initial design stages.
The reason the peep and the F sight did work at 100 yds is because the peep was also lower an equal amount. That is not a problem as the sight is suppose to have a sight stop which I had not yet installed as I didn't want to make it until I did shoot the rifle. This inherently will hold the peep in a slightly high position when installed. ( If you look at the peep sight, its left side you will see a screw hole and that is where the sight stop gets attached)
So I will make a new front sight and go back to the range for testing.
