S |
M |
T |
W |
T |
F |
S |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
Forums10
Topics38,935
Posts550,898
Members14,460
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Mar 2011
Posts: 4,119 Likes: 524
Sidelock
|
Sidelock
Joined: Mar 2011
Posts: 4,119 Likes: 524 |
I'm surprised Skeetx has mentioned his "Cheerio" cereal cure used as an on top of shot spacer. I believe it was Mike who mentioned his use of it. I use resin micro beads as a top-off filler. Compressible styrofoam bits can be used as well. In some loads I use a combination of felt and cork wads to raise the shot column from the bottom up. In a 20 ga. wad, 28 ga. cork and felt wads are used as the bottom of the wad tapers and is thicker than the top. In 16 and 12 ga., I'd probably try 20 ga. felt and cork wads if plastic wads with shot cups were used. In 1 oz.TSS 20 ga. loads in 2.75" I use a petaled plastic 28 ga. wad inside of a 20 ga. BP wad as a sabot to contain the shot and raise it level with the mouth of the larger wad. Gil
|
|
|
|
Joined: Dec 2020
Posts: 975 Likes: 410
Sidelock
|
Sidelock
Joined: Dec 2020
Posts: 975 Likes: 410 |
I was hoping to join the MEC 600JR users club this weekend when in Southams sale they had one in .410, apparently complete offered with 14 kg lead 7 shot and 1000 plus 209 primers.
As the estimate was £50 to £100, current retail NIB £365 and the primers and shot would retail at about £100 it was clearly a no-brainer to bid well over the upper estimate.
It was on a timed online sale, and on the morning took off like an Atlas rocket closing at a hammer price of £340 plus 24% so £421 to the buyer.
They did a good job for their vendor, and I hope the successful bidder is happy with his purchase, but I wonder at the wisdom of paying almost 90% of retail for a used second hand machine when a new one seems to be readily available.
|
|
|
|
Joined: Mar 2011
Posts: 4,119 Likes: 524
Sidelock
|
Sidelock
Joined: Mar 2011
Posts: 4,119 Likes: 524 |
The 600 Jr. is a solid unit. I'm in the process of converting my 20 ga. Jr. to handle two inch 12's. I've swapped out dies and the only thing left to do is figure out spacers for wad seating, pre-crimping and final crimping as the throw is limited in movement. De-priming, priming, powder and shot drops will be done by other means than with the MEC. My use of the 2" 12 is not high volume shooting so speed of reloading is not a problem. Cut down plastic hulls are difficult to roll crimp with vintage RTO compared with smaller gauges, at least for me. Paper hulls are easier to roll crimp. For 28 ga. and 16 2.5", I use a Ponsness Warren 375C which is single stage, but easy to use with built in full length resizing. Gil
|
1 member likes this:
Stanton Hillis |
|
|
|
Joined: Jan 2002
Posts: 11,464 Likes: 133
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 11,464 Likes: 133 |
Sorry I missed your mention of reloading 16's. When I first started reloading Cheddite hulls, I also tried using the Claybuster 7/8 oz wad. I gave up because, like you, I found that it left too much space in the hull. Could not get them to crimp properly. I'm currently using the Claybuster wad in black Remington hulls. Works very well. I think quite a few of us solved the Cheddite hull problem without using filler, spacer, or anything like that by switching to the Downrange DR16 wad. Unfortunately, good luck getting your hands on any DR16's now. You'll likely have to resort to some sort of filler, as suggested above, if you want to use the Claybuster wad in Cheddite hulls.
|
|
|
|
Joined: Jan 2009
Posts: 785 Likes: 23
Sidelock
|
Sidelock
Joined: Jan 2009
Posts: 785 Likes: 23 |
Both Gulandi 16 wads will work in the 16 2 & 1/2” Cheddite, not as nice as the DR-16, but they are a suitable alternative. BP sells them as does or did Grafs and Precision reloading. Nick Sisley published some time ago in Skeet Shooting magazine loads so for RST/Cheddite, now in Hogdons Reloading, using then PB and 7625 along with International and Universal, using the DR and Gulandi wads. Some of us use 20/28 as well as Green Dot. Good luck.
|
|
|
|
Joined: Mar 2011
Posts: 4,119 Likes: 524
Sidelock
|
Sidelock
Joined: Mar 2011
Posts: 4,119 Likes: 524 |
I've seen a few explanations regarding the non-availability of the DR-16 and all state problems in obtaining the necessary resin to make the wad. Gil
|
|
|
|
Joined: Jan 2002
Posts: 11,464 Likes: 133
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 11,464 Likes: 133 |
Both Gulandi 16 wads will work in the 16 2 & 1/2” Cheddite, not as nice as the DR-16, but they are a suitable alternative. BP sells them as does or did Grafs and Precision reloading. Nick Sisley published some time ago in Skeet Shooting magazine loads so for RST/Cheddite, now in Hogdons Reloading, using then PB and 7625 along with International and Universal, using the DR and Gulandi wads. Some of us use 20/28 as well as Green Dot. Good luck. When I started using the DR16's in the 2 3/4" Herters hulls, I worked up a load and had it tested by ballistician Tom Armbrust using 20/28: 16ga Herters hull Cheddite 209 primer 17.3 grains 20/28 7/8 oz shot Avg velocity 1182 fps Ave pressure 7420 psi 20/28 can be difficult to find these days, but the real problem is the DR16 wads. Something similar might work with some of the wads BP sells.
|
|
|
|
|