Simpler, cheaper, timmings don't get hung up, always the correct length as it doesn't index on the base wad, and you cand do a case of hulls while you watch TV
[Linked Image from imagizer.imageshack.com]
[Linked Image from imagizer.imageshack.com]

10ga , two 3/4" through couplings soldered together and cut to length needed
[Linked Image from imagizer.imageshack.com]

I haven't made a 16ga yet, will have to look into that. For 16s I'm using a 2x4 cut to 2.5" and holes drilled in it to fit close to 16ga. Stick the hulls in and cut them off with a sharp knife.

Last edited by oskar; 03/17/23 05:34 PM.
After the first shot the rest are just noise.