I use felt wads in paper cases. I find them easier to apply lube to and they load better than most of the bigger fiber wads. I am not sure how they would do in Magtechs. I load 3-1/4dr of 3F, a nitro card, a 1/4” dry felt wad, a 1/4” lubed felt wad (I use wonderlube), an overshot card, 1-1/8oz lead, and roll crimp. I sometimes use a Nitro card on top instead of an overshot card in brass cases if heavy walking is expected. I have used glue on top but am not convinced it’s necessary if the top card is tight.
Last edited by bsteele; 03/14/24 06:44 AM.
