On a shotgun the ideal would be >.002" /.004" . Please note the word ideal . On a double rifle if would have been enough to " break the smoke " ,as in enough not to bare .
Thank you very much. It seems to me that these tasks are not for the amateur or the faint hearted, especially being able to "just break the smoke" on jointing a double rife. I would like to be standing in a shop to watch it being done.
Thank you very much. It seems to me that these tasks are not for the amateur or the faint hearted, especially being able to "just break the smoke" on jointing a double rife. I would like to be standing in a shop to watch it being done.
Stephen Howell
I think you would find it pretty boring after the first 30 minutes . Graham
The list doesn't include Parker who used a 1/4" stove bolt for a hinge pin.
Actually that's kind of incorrect,they did use a large threaded pin,but it's purpose was hold the replaceable roll joint ,when you weigh out all the methods of rejoining an action,popping out that roll joint and replacing it with a fractionally oversized factory made joint ,it's a damn good idea, the same with the wedge replacement they used on later guns...like parker or not ,all break actions will shoot loose,some are harder to put right than others
Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.
Note: The posting of Copyrighted material on this forum is prohibited without
prior written consent of the Copyright holder. For specifics on Copyright Law and
restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.