Shave it down. If the stock is 14” Lop and your face is at the mid point at best a 1/4” bend will be a 1/2” bend at the heel. The further you move away from the stationary end the greater the effect will be. If your face hits at 4”, more likely the case, then the change at the heel will be greater. Having the comb lowered is so easy and just refinish the stock afterwards. But before I did anything I would shoot the gun for point of impact. It might be just about what you want already. I watch the pitch when buying a new gun. Some shooters have strange ideals about pitch. Gun fit is everything, not just comb height.
