No, (on the coffee) sounds do able. Let me work on it in the model and see. But thanks for the idea.
Update
I originally wanted a design in which the pin did not turn. The reason is because, no reason, other than the Tom Burgess pin did not turn in the pictures I showed. I don't know if that was planned or just it worked out that way. But I can't see any reason which should or shouldn't pivot, pin in base or blade on pin. Kutter's idea is the good one and very manufacturable and can easily be assembled/disassembled without tools.
So I think that checks all the boxes and I very much appreciate the design input. Makes me feels like I am back before retirement managing large design projects. With creative input of all kind. Some very helpful and then.........
Last edited by LRF; 04/01/25 05:33 PM.
