Register Log In

doublegunshop.com - home Forums General Discussion DIY Gunsmithing @ doublegunshop.com Checkering tools

October
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

2 members (Karl Graebner, NCTarheel), 523 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics39,493

Posts562,055

Members14,586

Most Online9,918
Jul 28th, 2025

Print Thread

Re: Checkering tools Rigby #660127 04/22/25 06:14 PM
Joined: Feb 2008 Posts: 2,100 Likes: 43 MT rocky mtn bill Sidelock
rocky mtn bill Sidelock Joined: Feb 2008 Posts: 2,100 Likes: 43 MT	Woodreaux's recommendation of Ullman cutters is good advice. If you limit yourself to one tool, I'd advise a 3/8 " 75 degree. That length is versatile to handle and the more acute blade tracks better than the 90 degree one. If the old checkering has a heavy coat of finish, scrub it with paint remover before you recut. Good luck. Bill Ferguson

Entire Thread
Subject	Posted By	Posted
Checkering tools	Rigby	04/18/25 01:49 PM
Re: Checkering tools	Woodreaux	04/22/25 12:03 AM
Re: Checkering tools	Rigby	04/22/25 07:04 PM
Re: Checkering tools	rocky mtn bill	04/22/25 10:14 PM
Re: Checkering tools	Kutter	04/23/25 08:00 PM
Re: Checkering tools	Hammergun	04/24/25 11:59 AM
Re: Checkering tools	Rigby	05/02/25 02:15 AM
Re: Checkering tools	Travis S	05/03/25 08:42 AM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 3.465s Queries: 17 (0.566s) Memory: 0.8036 MB (Peak: 1.9025 MB) Data Comp: Off Server Time: 2025-10-07 22:45:56 UTC
Valid HTML 5 and Valid CSS