I have been given a nice old Scott doublegun that was going to be sent to the authorities for destruction, as the upper rib is almost unsoldered, and no one wanted it.
For me it is a great opportunity to work on it and try to salvage it. Of course I am not going to make soldering work on a perfectly working gun, so as this one is not working, it is a great candidate to punt my hands on jajaja
I have seen several videos in barrel re-soldering, but would like to know if any one has a good recommendation if a book/video/blog, where I can get as much technical information about flux used, solder, process, etc....
Also the stock is horrible, with several coats of lacquer, and almost all the checkering gone, so it would be a great project of restoration and see what level I can achieve as a DIY "gunsmith"
