Not sure if I mentioned it prior, but the tubeset is 62 cm in length.

Also, I do not full length resize; I pull down just enough to knock the primer out. On this next round, all the cases are in the same state w/ a couple have a few more rounds thru them.

After knocking the primer out, I check all cases by loading them in the chamber before I re-prime & start the reloading process. I guess the OAL just be a skosh shorter, but they chamber and extract with a slight amount of friction before firing. I'll make sure I clean them w/ lighter fluid(Ronson) before I fire the next lot.

On odd cases like these, I do clean the inside of the brass with a Q-Tip......

Hochachtungsvoll,

Raimey
rse