doublegunshop.com - home Forums General Discussion Double Rifles, Paradox Guns & Gauge Rifles @ doublegunshop.com Double rifle express with shotgun style stock

Hello

I have always seen express rifles with pistol grip, no matter what the caliber was....

But I have felt in love with the lines and beauty of an express with no pistol grip, and a plain shotgun style stock.

I am sure most will say pistol grip is necessary for the hand not to move after first shot, surely that is true in 375 and larger calibers, but what about smaller ones??? European calibers such as 9,3x74R could benefit from a non pistol grip stock???

I really like the beautiful and graceful lines of the express with that stock.

I send a photo from a Book (Spanish Best), and was searching for more photos and examples. Maybe someone can share more photos???

I also learned that Doumoline catalogue, offers 4 styles of stock for their double rifles, and they offer a "British style" stock, with a non pistol grip.

I have received a nice photo of a Purdey gun with a straight stock.

Wanted to share with all

Anyway, if someone else can share more examples, I would really appreciate it.

I assume from the cartridge box in the case that the Purdey is in .303 British.

Interspesting they were still using the Jones Underlver (or an improvement), or “Lever Over Guard” as they would term it.

My Galazan .22 double rifle, Model 21, has a straight stock and a splinter forend, in true bird gun style.

Eightbore, can you share some photos of that cute .22 doule rifle???

Pics for RMB, a lovely Lancaster oval bore

Steve, Thanks for posting these. I hope you and others here can offer advice about a proper bullet. The muzzle diameters are about .488 and .505" Any other info much appreciated.

I would start with a pure lead bullet that paper patches up to .487", seated over a lubed felt wad. I had a .451 single barrel that was a sporting/match configuration that as far as I know is still owned by a board member. There was an article written by another board member in the DGJ about how he went about getting his oval bore to shoot.

You might contact the maker, the records still exist.

Steve, What style and weight of bullet would you suggest? The diameter may rule out some readily available candidate. Thanks, Bill

Bill,
It will depend on your paper which will add .006 to .008" to the diameter with two full wraps, you can size bullets as well with a lubesizer. I looked and could not find commercial bullets that I thought would be a good starting place. I thinking a custom mold, throwing a bullet around .479" or so and a heavy bullet(500 grains or so) is the way to start. You might look at the sights for an idea as to bullet weight, lots of height difference and likely a heavy bullet. Might ask on ASSRA if anyone has a mold of about that diameter, check ebay as well.