It is easier to bend for cast than drop, but usually you need to modify drop a bit less. I just had this bent, got nearly a half inch of difference in drop. The only issue was one screw on the tang needed to be redrilled and the old hole filled.



[[img]https://ibb.co/Z1T5MHQk[/img]

[img]https://ibb.co/CpSGk4rT[/img]]

Last edited by TCN; 04/08/26 06:47 PM.
"More important, we hoped that when Autumn came, the birds would fly"

-Guy De La Valdene