September
S M T W T F S
1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30
Who's Online Now
1 members (1 invisible), 2,832 guests, and 6 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums10
Topics40,423
Posts575,269
Members14,712
Most Online32,084
Jun 14th, 2026
Previous Thread
Next Thread
Print Thread
Joined: Mar 2006
Posts: 544
Likes: 21
RedofTX Offline OP
Sidelock
***
OP Offline
Sidelock
***

Joined: Mar 2006
Posts: 544
Likes: 21
Hello all. Off to work but I am posting some photos. Bore measurements and chokes will be posted later when I can measure them.

12ga
1 3/8 DAC
2 3/8 DAH
14 1/2 LOP
30" barrels.
This is a 4E grade, the thread link at the bottom of the pictures discusses the grade.
The 'E' does not work. I've always pulled the empties out with my fingers.
There is no pitting in the bores.
With a Skeet's gauge - the Right bore is .728
The Left bore is .728
the Right choke is .715
The Left choke is .716
There is the ever slightest depression in the left bbl 9" from the breech, and it is barely noticeable.
I do not have a way to measure wall thickness
With my brass Galazan chamber gauge, Both Chambers are between 2 3/4 and the 3" mark......so 2 7/8? each.
I used to have a Remington that was stamped 2 7/8 on the bbl flats but the only numbers on the bbl flats of this gun is the serial #.
$1300.00 shipped to your ffl.


[Linked Image from i.imgur.com]
[Linked Image from i.imgur.com]
[Linked Image from i.imgur.com]
[Linked Image from i.imgur.com]
[Linked Image from i.imgur.com]
[Linked Image from i.imgur.com]
[Linked Image from i.imgur.com]


https://www.doublegunshop.com/forums/ubbthreads.php?ubb=showflat&Number=522853&page=1


Info added 9/1, 8:30pm CST

Last edited by RedofTX; 09/11/26 12:41 PM.
Joined: Jan 2002
Posts: 10,536
Likes: 170
Sidelock
*
Offline
Sidelock
*

Joined: Jan 2002
Posts: 10,536
Likes: 170
pls tell us about the bore condition...

and confirm this is an ejector gun...

looks like grade 4 engravings?


keep it simple and keep it safe...

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack

Order or request info | Other Useful Information

Updated every minute of everyday!


Copyright (c) 1993 - 2026 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5