Hello all. Off to work but I am posting some photos. Bore measurements and chokes will be posted later when I can measure them.

12ga
1 3/8 DAC
2 3/8 DAH
14 1/2 LOP
30" barrels.
This is a 4E grade, the thread link at the bottom of the pictures discusses the grade.
The 'E' does not work. I've always pulled the empties out with my fingers.
There is no pitting in the bores.
With a Skeet's gauge - the Right bore is .728
The Left bore is .728
the Right choke is .715
The Left choke is .716
There is the ever slightest depression in the left bbl 9" from the breech, and it is barely noticeable.
I do not have a way to measure wall thickness
With my brass Galazan chamber gauge, Both Chambers are between 2 3/4 and the 3" mark......so 2 7/8? each.
I used to have a Remington that was stamped 2 7/8 on the bbl flats but the only numbers on the bbl flats of this gun is the serial #.
$1300.00 shipped to your ffl.


[Linked Image from i.imgur.com]
[Linked Image from i.imgur.com]
[Linked Image from i.imgur.com]
[Linked Image from i.imgur.com]
[Linked Image from i.imgur.com]
[Linked Image from i.imgur.com]
[Linked Image from i.imgur.com]


https://www.doublegunshop.com/forums/ubbthreads.php?ubb=showflat&Number=522853&page=1


Info added 9/1, 8:30pm CST

Last edited by RedofTX; 09/11/26 12:41 PM.