S |
M |
T |
W |
T |
F |
S |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
Forums10
Topics38,931
Posts550,846
Members14,460
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Mar 2006
Posts: 278
Sidelock
|
Sidelock
Joined: Mar 2006
Posts: 278 |
|
|
|
|
Joined: Dec 2005
Posts: 298
Member
|
OP
Member
Joined: Dec 2005
Posts: 298 |
Stopper gun AND a deer gun. I have the option to load it either way. Just from my first trial with 3 different loads I found this gun can be used for very light "work" or heavy "work".
Stopper refers to use against Dangerous Game.
I find a short 20 inch barreled gun is just ideal for heavy brush... and a double side by side is simply my favorite and yes i think the most pragmatic. Bang. Bang. Could be loaded heavy for grizzly or wild bore, or loaded way down for white tail.
And yes if I ever get to africa or some other destination for dangerous game I have a doubel rifle that can be used too. I gues sthe term stopper simply means it can be used to stop a charge: a 535 grain Woodleigh round nosed at about 2,000 fps packs a heck of a wallop. So that is what I mean by stopper gun... only when it is laoded UP. Otherwise it is just a practical side by side that happens to be a 50 cal and can shoot pretty well out to 75 yards.
|
|
|
|
Joined: Apr 2005
Posts: 1,764 Likes: 8
Sidelock
|
Sidelock
Joined: Apr 2005
Posts: 1,764 Likes: 8 |
|
|
|
|
Joined: Feb 2005
Posts: 7,438 Likes: 1
Sidelock
|
Sidelock
Joined: Feb 2005
Posts: 7,438 Likes: 1 |
Yogi: I have a couple of questions. How did the builder regulate this gun when he built it? Since double rifles are usually regulated for one specific load how are you maintaining accuracy with all the different loads you cited above? I'm NOT being critical here but I'm really interested in how this is being done. BTW: That is truly a beautiful looking gun. Jim
The 2nd Amendment IS an unalienable right.
|
|
|
|
Joined: Jan 2004
Posts: 6,996 Likes: 493
Sidelock
|
Sidelock
Joined: Jan 2004
Posts: 6,996 Likes: 493 |
Sweet sweet sweet!
It looks like the barrels are simply relined from front to back. Is that what he did in the original shotgun barrels?
Do you know how he regulated it?
Way cool,
Now, git to Africa and bring back more pictures!!!
Brent
_________ BrentD, (Professor - just for Stan) =>/
|
|
|
|
Joined: Aug 2006
Posts: 931
Sidelock
|
Sidelock
Joined: Aug 2006
Posts: 931 |
Congratulations - that's realy quite nice!
As for regultion - I'd be willing to bet that the liners are slightly eccentric - this way one could rotate them in the barrels until the desirable POI was reached, and then fix'em in permanently.
|
|
|
|
Joined: Feb 2008
Posts: 11,468 Likes: 488
Sidelock
|
Sidelock
Joined: Feb 2008
Posts: 11,468 Likes: 488 |
Would it be correct to assume this or any other conversion action could withstand the same force that the original cartridge generated, even though the new cartridges' working pressure may be greater? Force = pressure x area, and the base of a 12 ga. shell at say 10,000psi is much larger than the area of the base of the .50-90, so I'm asking if the ratio of the areas would be a means of calculating a safe working pressure in the conversion. I'm sure there are probably other factors to consider, and I also wondered about the need for smaller bushed firing pins. Excess headspace will also allow the unsupported primer to back out and flatten.
A true sign of mental illness is any gun owner who would vote for an Anti-Gunner like Joe Biden.
|
|
|
|
Joined: Dec 2005
Posts: 298
Member
|
OP
Member
Joined: Dec 2005
Posts: 298 |
Sorry, been traveling on Business...
Wow, alot of good questions. I don't think I can answer them all. For example---how did my gunsmith regulate this double.... hmmmm, I'd have to reply: like anyone regulates a double. Setting the barrels to where your years of experience tell you you should set them, soldereing them in, and going to the range and shooting it with various approx. powder charges of a desired load, trying to get them to hit poi at a certain distance. Correcting when it is not perfect and then resoldering and shooting again... In this case it was 75 yards. The bullet was a 535 Woodleigh. The charge hew as going for was somewhere between 70 and 82 grains of Reloader15. It took him about 9 months to get it where he thought it was right and the targests he sent me had a less than 2 inch spread for both barrels at 75 yards and with that accuracy---I am quite happy.
He has made several 50-90 double guns so he knew where to start, and he has built other large caliber double conversion guns as well.
Also, I strongly believe it is a myth to say a double is only capable of shooting ONE load accurately. As Graeme Wright related in his famous book "Shooting a Britsh Double" --- 'it is incorrect to think a double can only be regulated to one bullet and one load'... with experimentation you can find more. I think you are only limited by your patience and your fortitude... and support from the double gun gods.... As someome who used to formulate epoxies I can tell you the variables are endless and you can get to the same point many ways... The same holds true, I contend, with getting a double to shoot various bullet weights and bullet designs using various types of powders and various weights to hit at POI at your regulation distance. Heck, my first try and I had 3 different loads (2 different bullets/ two different powders) hitting within a couple of inches of the bullseye and I was shooting standing and shooting in very low light! 12 shots of all three loads would have taken down whatever I was aiming at. But the point is, and I am hardly the first to discover it---I double can shoot more than one bullet ie one load to POI. Is the factory (or gunsmith/builder) responsible for doing more than ONE? No, it is customary to do one.... but the owner of the gun can find the other happy loads.
Let's face it, even if the factory regulates a gun with a certain load but you take that gun/load to Africa or other locale with very different temp/humidty the gun/load combination can shoot off, ie no longer regulated ... and thus you need to find a NEW load that is regulated to THAT climate, and you can!...
The way I see it is I have at least 7 different candidate bullets and at least 5 different powders and yes that means quite a number of combinations and opportunities to find loads that hit to POI with both barrels at 50 yards. (which is where I regulate to).
Working pressures --- If memory serves me I think I am shooting in the 20,000-23,000 PSI range with the loads I have worked up. And this is well within the capability of this beefy Merkel with beefy Pacnor barrels within the 12 gauge tubes. I understand the Merkel 500 Nitro Express is built on their 16 gauge: this is what I was told. If thi IS true, this supports the notion Merkel shotguns are strong enough for conversions.
Yet bear in mind with the 50-90 loads I'm working with, these are more like a Light Nitro. I am not in the pressures ranges of the 500 Nitro Express.
And regarding the area of the base---The way I see it is the chamber has been reamed out of the 50 caliber barrels for the flanged 50-90 cartridge it is not the area of a 12 gauge. The 50 cal barrels are within the 12 gauge tubes.
|
|
|
|
Joined: Dec 2001
Posts: 12,743
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 12,743 |
One thing which I have always wondered about, so this seems like a good place to ask. This would of course depend upon the actual model of gun in question, but many doubles over the years have been built with the same bar for different gauges, only the height & width of the standing breech & spacing of the firing pins being changed to accomodate the different sizes. If this be the case would not a gun built on a 16ga be stronger than one built on a 12ga as the leverage applied to the breech would be lower? If this is a model in which the entire frame is slimmed down for the smaller gauge this would of course not be true.
Miller/TN I Didn't Say Everything I Said, Yogi Berra
|
|
|
|
Joined: Nov 2006
Posts: 72
Sidelock
|
Sidelock
Joined: Nov 2006
Posts: 72 |
Yogi 000, Very cool rifle, can you share what year the merkel was manufactured? Thanks.
|
|
|
|
|