Do any of you guys have any problems with Webley and Scott ejectors? I have a pair of Webleys and for the second time the little alignment pins at the top of the ejector blades has broken in the hole. The pins keep the ejector blades in place and are only 5/64 diameter. When these pins break the broken pin is not easy to get out but it is dooable. I got the pin out today and now have to get the rest of the pin out of the ejector blade. It looks like this one was threaded into the ejector blade but the new one will most likely be silver soldered.
Just wondering if anybody else has had this problem.
Thank You, Gordon
