Does anyone have any schematics or have a model of 50's era Sauer O/U scope mounts

dblgnfix,
Does the gun have bases installed or is the barrel bare? Photos would be helpful. Mounts for these were mostly custom fit.
Mike

I believe there is nothing on the gun except a rib. I could make them if I have a model or something to go by

dblgnfix
If you check the website for Ernst Apel Wuerzburg (EAW) or Recknagel ( ERA), you will find schematics. You should note that none of them depend on the rib to hold the mounts. Except for the very rear part of the rib(which is hard soldered, you can likely see the joint) it is soft soldered to the barrel and would not stand up to the stress of the weight of the scope under recoil. There are a few people here that can do the work, but are expensive.
Mike