|
S |
M |
T |
W |
T |
F |
S |
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums10
Topics38,472
Posts545,155
Members14,409
|
Most Online1,335 Apr 27th, 2024
|
|
|
Joined: Feb 2006
Posts: 175
Sidelock
|
OP
Sidelock
Joined: Feb 2006
Posts: 175 |
Looking for input. I'm going to open the chokes on a W&S 12ga SxS 26", 6# 2oz. Right now its at Imp. Mod and Very full. Thinking along the lines of skeet 1 and skeet 2 or maybe Cyl. and Imp. Cyl. This will be used exclusively for chasing our local grouse and woodcock population over my Springers. I'm sure it will see the skeet range from time to time also. I'm a firm believer in that modern components make our chokes on the average shoot a little tighter. I shoot a home load of 7 1/2 shot at 1100 fps and it's been good to me when I do my part. Your thoughts and knowledge appreciated. Thanks Bob
BEWARE OF DOGMA
|
|
|
|
Joined: Nov 2006
Posts: 610
Sidelock
|
Sidelock
Joined: Nov 2006
Posts: 610 |
Bob,have you tried using spreader loads like polywads,or the BP X inserts? It's always a shame to take metal out of an old gun.
|
|
|
|
Joined: Dec 2001
Posts: 3,964 Likes: 89
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 3,964 Likes: 89 |
Bob, .005 and .015/.020 would give you a great selection and cover a lot of situations. I have no hesitation to open chokes, especially on non-collector guns such as your W&S. Good luck!
When an old man dies a library burns to the ground. (Old African proverb)
|
|
|
|
Joined: Feb 2007
Posts: 213 Likes: 3
Sidelock
|
Sidelock
Joined: Feb 2007
Posts: 213 Likes: 3 |
Bob, I bought a W&S a previous owner had opened up to just over CYL/CLY--.004 on both barrels. I use felt wad loads for grouse/ptarmigan, plastic shot cup loads for prairie grouse/preserve pheasants with excellent results. 7/8 or 1 oz. of #7's at 1150 does the job for me. Justin has a point about removing metal.....there is no turning back, but I tend to agree with Joe. I buy my guns to shoot, not just stick in the safe.
Steve
"Every one must believe in something, I believe I'll go hunting today."
|
|
|
|
Joined: Jan 2002
Posts: 5,983
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 5,983 |
Ditto what Joe suggested. I have my Parker @ .007" and .013". I'm very happy with that for Sporting, skeet and the limited bird hunting I do.
> Jim Legg <
|
|
|
|
Joined: Jan 2002
Posts: 5,954 Likes: 12
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 5,954 Likes: 12 |
Tight chokes and spreader loads give you some useful versitility, provided you don't mind carrying the extra loads. I'd suggest you experiment with the spreaders before you cut. You can always cut or cut more. Sure is hard to put back, though.
|
|
|
|
Joined: Jan 2002
Posts: 869 Likes: 2
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 869 Likes: 2 |
I would first try spreaders. They will likely surprise you and open things plenty for grouse/wc.
If you plan alot of shooting the cost of factory spreaders may be a concern. You can purchase spreader discs/inserts and load your own. Its really pretty simple.
If you open the chokes I pretty much agree with the others. I would go .005 and .015 for a dedicated 12 ga grouse/wc gun.
Sam
|
|
|
|
Joined: Feb 2006
Posts: 175
Sidelock
|
OP
Sidelock
Joined: Feb 2006
Posts: 175 |
Thanks to all who posted! I agree that you can't put it back. Will advance with caution. Thanks Bob. Always like to have people with like thoughts on your side!
BEWARE OF DOGMA
|
|
|
|
Joined: Jul 2005
Posts: 7,065
Sidelock
|
Sidelock
Joined: Jul 2005
Posts: 7,065 |
I would go cylinder and 7 thousandths.
Best,
Mike
I am glad to be here.
|
|
|
|
Joined: Jan 2006
Posts: 15,456 Likes: 86
Sidelock
|
Sidelock
Joined: Jan 2006
Posts: 15,456 Likes: 86 |
It's always a shame to take metal out of an old gun. It's Shameless.
|
|
|
|
|
|