doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com AyA striker replacement procedure?

Does anyone know where I can obtain a procedure for replacing AyA #2 strikers?

I imagine they are just like any Spanish gun. I have a pin tool that Cole Haugh made for me, but I've also gotten the bushings loose with a small brass punch that will fit in one of the holes at a 45 degeree angle, then tapping counter clockwise until loose.
When you remove the disc, the pin will be inside; also a little return spring on the front neck of the pin.

What is the problem with the pins? Pins, no doubt, can be bought from Aya or Cole Haugh probably has them too. Cole's email is www.cole60@hotmail.com

Unscrew them using a pin wrench, Brownells has them

http://aya-fineguns.com/detalles_en.php?wgo=88&wval=128&main=AYA- AN OBJECT OF DESIRE

Mike

2holer wrote, "What is the problem with the pins? Pins, no doubt, can be bought from Aya or Cole Haugh probably has them too."

A pin broke. AyA referred me to NECG who wants me to ship the gun to New Hampshire and wants $75 a pin. I don't mind the fee, but I do not want to ship the gun. Also, the job appears to be very simple and requires a spanner wrench. If I can't do it any number of local gunsmiths can. NECG agreed to ship two pins @$35 each and cautioned me that hand fitting would be required.

Do not forget the gasevacuation screw on side first.

Regards Lennart