doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Tru oil on new checkering

I find that the firt thing to do is brush in a little stain as was used in finishing the stock. If it is a factory finish, I'll bet it still needs some stain.

I then use minwax wipe on poly. Apply a thin coat with a toothbrush. If need be, apply a second thin coat.

PS I am a big fan of Minwax wipe on poly. I use it to cut the truoil. I figure the poly gives the truoil a true waterproof finish. I have had great luck with this combo for finishing stocks. I am just a beginer though....

Jerry

My local expert advised to go over the checkering first, with a stiff brush, to clean it up, then used the diluted TruOil. Also, while you're at it, remove all furniture and make sure there's no exposed wood underneath. Go to Gander Mt. and remove the forend from a new 525 Sporting, ....you'll find untreated wood.

If you want to know how dark the checkering is going to look with a clear finish on it, hit it with mineral spirits. They will make it close to the color with finish and will evaporate in a few minutes. Then you'll know whether you need stain or not. By the way I despise stain, it's a last resort. Way last.

Jeff

I think "despise" should be reserved for mustard greens.

or canned spinach!

you yankee's don't know how to cook greens!