|
S |
M |
T |
W |
T |
F |
S |
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
|
|
|
|
|
Forums10
Topics38,373
Posts543,993
Members14,389
|
Most Online1,131 Jan 21st, 2024
|
|
|
Joined: Jul 2012
Posts: 4,445 Likes: 201
Sidelock
|
Sidelock
Joined: Jul 2012
Posts: 4,445 Likes: 201 |
Robert, Measure from the "step" at the end of the chamber neck to the bottom of the rim, then add rim thickness. If you do it in inches, to the thousandths, we can convert. Mike
|
|
|
|
Joined: Oct 2015
Posts: 184 Likes: 1
Sidelock
|
OP
Sidelock
Joined: Oct 2015
Posts: 184 Likes: 1 |
the chamber cast was a little awkward working around the extractor but I think it came out ok. case length: 2.19-2.20 or 55mm case diam at base: .4250 or 10.79mm case diam at start of slight shoulder: .390 or 9.92mm case diam at end of slight shoulder: .355 or 9.02mm case diam at mouth: .3395 or 8.62mm
chamber neck: looks to be .265 or 6.74mm bullet grooves .3185 or 8.09mm bullet lands .3095 or 7.86mm
|
|
|
|
Joined: Oct 2015
Posts: 184 Likes: 1
Sidelock
|
OP
Sidelock
Joined: Oct 2015
Posts: 184 Likes: 1 |
The case not including the rim is 53.95 and The rim thickness on the fired cases is 1.46mm.
|
|
|
|
Joined: Jul 2012
Posts: 4,445 Likes: 201
Sidelock
|
Sidelock
Joined: Jul 2012
Posts: 4,445 Likes: 201 |
Robert, See my comments in GGCA forum, It looks like 32-40 chamber in an 8mm barrel. Mike
|
|
|
|
Joined: Aug 2007
Posts: 10,736 Likes: 181
Sidelock
|
Sidelock
Joined: Aug 2007
Posts: 10,736 Likes: 181 |
Edgar Hübner Gepr. Büchsenmachermeister Suhl or Edgar Hübner Geprüft Büchsenmachermeister Suhl Geprüft Don't know that I've seen it prior but ole Edgar Hübner seems to indicated that he just checked the longarm? Probably sourced it in the white from the Zella - Mehlis mechanics. Cheers, Raimey rse
|
|
|
|
Joined: Oct 2015
Posts: 184 Likes: 1
Sidelock
|
OP
Sidelock
Joined: Oct 2015
Posts: 184 Likes: 1 |
|
|
|
|
Joined: Apr 2012
Posts: 180
Sidelock
|
Sidelock
Joined: Apr 2012
Posts: 180 |
Raimey,
Edgar Hübner Gepr. Büchsenmachermeister Suhl
- gepr. in this case is short for 'geprüfter' (certified, examined) the line translates as 'Edgar Hübner Certified Master Gunsmith Suhl'
so he might well have made the gun
best regards Gunter NRA Life 1974
'
|
|
|
|
Joined: Jul 2012
Posts: 4,445 Likes: 201
Sidelock
|
Sidelock
Joined: Jul 2012
Posts: 4,445 Likes: 201 |
Gunter, Of course it depends what you mean by "made", that may mean the same to you as "finished" meant to me above. Mike
|
|
|
|
Joined: Apr 2012
Posts: 180
Sidelock
|
Sidelock
Joined: Apr 2012
Posts: 180 |
Mike, no offense or anything else intended! Just thought to clarify the german usage of the word 'geprüft' in this context. I did say he 'might' have made it - which he might! Rgds Gunter
|
|
|
|
Joined: Jul 2012
Posts: 4,445 Likes: 201
Sidelock
|
Sidelock
Joined: Jul 2012
Posts: 4,445 Likes: 201 |
Gunter, I didn't think any offense was intended. Mike
|
|
|
|
|
|