|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
1
|
2
|
3
|
4
|
5
|
6
|
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
|
28
|
29
|
30
|
|
|
|
|
|
|
2 members (eightbore, SKB),
440
guests, and
5
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums10
Topics38,466
Posts545,087
Members14,409
| |
Most Online1,258
Mar 29th, 2024
|
|
|
|
Joined: Feb 2012
Posts: 166 Likes: 19
Sidelock
|
Sidelock
Joined: Feb 2012
Posts: 166 Likes: 19 |
Not too picky as long as its currently available. Have Blue and Green Dot and Amer. Select on hand.
----MattH
President, Ga. Vintagers
|
|
|
|
|
Joined: Dec 2006
Posts: 3,218 Likes: 121
Sidelock
|
|
OP
Sidelock
Joined: Dec 2006
Posts: 3,218 Likes: 121 |
Hey Matt, here's one that's close:
20grs of Solo
Cheddite 209 primer
SG16 wad
6800psi
1160fps
That's about all I can find, sorry.
Hope someone else can chime in with some loads.
Good Luck!
Greg
Gregory J. Westberg
MSG, USA
Ret
|
|
|
|
|
Joined: Feb 2012
Posts: 166 Likes: 19
Sidelock
|
|
Sidelock
Joined: Feb 2012
Posts: 166 Likes: 19 |
Thank you Greg! That looks good.
I appreciate all the other suggestions I've gotten from this thread as well. Thanks to all who have responded in-thread or privately. ----Matt
----MattH
President, Ga. Vintagers
|
|
|
|
|
Joined: Dec 2006
Posts: 3,218 Likes: 121
Sidelock
|
|
OP
Sidelock
Joined: Dec 2006
Posts: 3,218 Likes: 121 |
Your welcome. You may even be able to bump it up a 1/2 to a full grain and get closer to what you want. But, you'd have to get it tested to make sure.
Take care!
Greg
Gregory J. Westberg
MSG, USA
Ret
|
|
|
|
|
Joined: Mar 2011
Posts: 4,080 Likes: 466
Sidelock
|
|
Sidelock
Joined: Mar 2011
Posts: 4,080 Likes: 466 |
2.5" Cheddite hull
Cheddite 209 primer
14.5 gr Am. Sel.
DR-16 wad
7/8 oz. lead
OSC and roll crimp
1103 fps
5966 psi
Pressure could be raised with a star crimp.
|
|
|
|
|
Joined: Dec 2001
Posts: 998 Likes: 65
Sidelock
|
|
Sidelock
Joined: Dec 2001
Posts: 998 Likes: 65 |
I have loads, but they run in the 9,000 psi range.
|
|
|
|
|
Joined: Oct 2019
Posts: 466 Likes: 188
Sidelock
|
|
Sidelock
Joined: Oct 2019
Posts: 466 Likes: 188 |
My “go to” 1oz load for 2 3/4” 16’s nearly mirrors the original turn-of the-century load that Drew has referenced in other threads. Using Universal it comes in at 1165 and 7100.
For my short chambered 16’s I’ve settled on a 3/4 oz load using International that measures 1150 and 6200.
They both use Cheddite hulls and Ched 209 primers.
You’ll find them on the Hodgdon site.
Speude Bradeos
|
|
|
|
|
|
|
