November
S M T W T F S
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30
Who's Online Now
1 members (Dave Weber), 99 guests, and 5 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums10
Topics36,355
Posts510,793
Members14,102
Most Online462
Aug 5th, 2016
Previous Thread
Next Thread
Print Thread
Page 5 of 5 1 2 3 4 5
Joined: Aug 2007
Posts: 9,607
Likes: 23
Sidelock
***
Offline
Sidelock
***

Joined: Aug 2007
Posts: 9,607
Likes: 23
So, >>Helice 33<<, >>Helice 33 Nr. 3<<, >>Helice<<, etc.

are all misnomers? I do wonder whose piano was used as a donor for the springs??

Serbus,

Raimey
rse

Joined: Jan 2021
Posts: 8
Boxlock
OP Offline
Boxlock

Joined: Jan 2021
Posts: 8
Originally Posted by Mark II
Were you able to get it apart?

Just about. The trigger guard is stuck solidly to the trigger plate. I've tried heat, penetrating oil, etc. to no avail.

I'm likely sending this one up to Rust Blue in Natick Mass for a complete strip-down and evaluation of cost for alleviating the pitting of the bore. The stock wound up being completely broken at the wrist. The compression of the tang and trigger plate was all that was holding it together. The proper brass stock repair dowels are inbound today along with acraglas to effect a repair. I have a jig built to apply proper tension to make the repair invisible when done.

Joined: Jan 2002
Posts: 10,999
Likes: 9
Sidelock
**
Offline
Sidelock
**

Joined: Jan 2002
Posts: 10,999
Likes: 9
Originally Posted by ellenbr
So, >>Helice 33<<, >>Helice 33 Nr. 3<<, >>Helice<<, etc.

are all misnomers? I do wonder whose piano was used as a donor for the springs??

Serbus,

Raimey
rse


I understand that one could choose either Liberace or Jerry Lee Lewis piano wire.

Page 5 of 5 1 2 3 4 5

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack

Order or request info | Other Useful Information

Updated every minute of everyday!


Copyright (c) 1993 - 2021 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.050s Queries: 21 (0.016s) Memory: 0.8006 MB (Peak: 1.8991 MB) Data Comp: Off Server Time: 2021-11-28 11:25:53 UTC
Valid HTML 5 and Valid CSS