Here's an excellent video by Rich Cole showing what goes into fitting a new set of barrels. He's working on a DT11, but the same principles apply to the 680 series guns. There is much more to proper barrel fitting than swapping out a few parts and calling it good.
My brother-in-law shot 680 series trap guns in competition. I own and have owned many 680 series guns, but never shot one enough to wear it. He, however, shot thousands of rounds a year. He mentioned several times that he always had his gun tuned up byt the Beretta people at Vandalia in order to avoid an unexpected breakdown. This was several years ago, but he said they did it on a walk-in basis and replaced the trunions, hammer springs and lubed and checked the internals for a very nominal fee in just a few minutes. I doubt they were fitting the parts in that scenario.
Years ago when I was choosing between a Beretta and a Browning 20 ga. o/u, I spoke with a local gunshop owner and gunsmith. At that time, he said it was difficult obtaining parts for repairing the Citori. As for the Beretta 680 series, he had fewer of them for repair, but BerettaUSA was a responsive and reliable source for parts. Based on his comments, I bought the Beretta. This was over 15 years ago, and things may have changed by now. Gil
Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.
Note: The posting of Copyrighted material on this forum is prohibited without
prior written consent of the Copyright holder. For specifics on Copyright Law and
restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.