|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
2 members (WJW, LGF),
585
guests, and
5
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums10
Topics38,506
Posts545,604
Members14,419
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Oct 2004
Posts: 976
Sidelock
|
OP
Sidelock
Joined: Oct 2004
Posts: 976 |
What is the preferred method for filling burls? Shallow? "Deep"? Coloring for fill material. Thanks,
Jim
|
|
|
|
Joined: Dec 2001
Posts: 2,961 Likes: 9
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 2,961 Likes: 9 |
I use epoxy and Brownells powdered dyes atch the color. Always go a bit light in color. bill
|
|
|
|
Joined: Aug 2003
Posts: 2,936 Likes: 16
Sidelock
|
Sidelock
Joined: Aug 2003
Posts: 2,936 Likes: 16 |
Jim, epoxy is fine and mix in some fine sawdust from the stock. Bobby
|
|
|
|
Joined: Mar 2002
Posts: 7,731 Likes: 489
Sidelock
|
Sidelock
Joined: Mar 2002
Posts: 7,731 Likes: 489 |
Epoxy works fine with a little dye. Saw dust is optional but if the burl hole is large it looks better with saw dust. To get good penetration I use heat to thin the epoxy when applied. Makes it very watery. Thick epoxy is very hard to get down into the bottom of the burl defect but water thin almost runs down to the bottom.
|
|
|
|
Joined: Aug 2004
Posts: 517
Sidelock
|
Sidelock
Joined: Aug 2004
Posts: 517 |
Ground horse hooves was the preferred method a century ago. Don't see why it wouldn't work today and I would guess that DT would agree.
|
|
|
|
Joined: Feb 2004
Posts: 13,880 Likes: 16
Sidelock
|
Sidelock
Joined: Feb 2004
Posts: 13,880 Likes: 16 |
epoxy with black filler coloring. Never had any luck matching color.
|
|
|
|
Joined: Sep 2003
Posts: 1,231
Member
|
Member
Joined: Sep 2003
Posts: 1,231 |
Seems a good place for shellac stick.
|
|
|
|
Joined: Dec 2001
Posts: 12,743
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 12,743 |
Ground horse hooves was the preferred method a "century" ago. You rekon some hoof from a half century old John Deere would work. Even us hillbillies mechanized "Before the War"
Miller/TN I Didn't Say Everything I Said, Yogi Berra
|
|
|
|
Joined: Jan 2004
Posts: 6,738 Likes: 430
Sidelock
|
Sidelock
Joined: Jan 2004
Posts: 6,738 Likes: 430 |
Miller, you can probably get some hoof clippings at any riding stable. We trim our horses too often to bother much with nippers, but folks that shoot their horses will generate a lot of hoof material. A quick call to any farrier will probably be just as quick.
Brent
_________ BrentD, (Professor - just for Stan)
|
|
|
|
Joined: Mar 2006
Posts: 516
Sidelock
|
Sidelock
Joined: Mar 2006
Posts: 516 |
Depending on the size of the void, I'll use a plug cutter to patch large voids cutting plugs from the offcuts of the blank, shellac sticks are great and epoxy with a little fine dust as well. The fine dust is best applied to the top of the epoxy, it tend to tone down the luster of the epoxy when sanded and finish.
|
|
|
|
|
|