March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Who's Online Now
1 members (eightbore), 827 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums10
Topics38,374
Posts544,014
Members14,391
Most Online1,131
Jan 21st, 2024
Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
#224276 04/02/11 02:47 PM
Joined: Jan 2008
Posts: 704
Sidelock
**
OP Offline
Sidelock
**

Joined: Jan 2008
Posts: 704
There have been a couple of requests. I suggest Robert F. MacKinnon in Slatington, PA, about fifteen miles north of Allentown. He has done almost all my Krag work the last fifteen or twenty years, worked on probably a dozen guns. I am away from hoome, can't give you a phone or email. Has rebarreledincluding full length infantery barrels that he had made for him, altered US Krags to double locking lug and extra front receiver screw like Scandinavian Krags, made a 7x57 Norwegian sporter, etc. He is not a fancy woodwork man but is competent at it. A specialty is making missisng parts for WW2 German sniper scope mounts. PS it may be McKinnon not MacKinnon.

Joined: Jul 2005
Posts: 2,398
Likes: 16
Sidelock
***
Offline
Sidelock
***

Joined: Jul 2005
Posts: 2,398
Likes: 16
I will note Mr. McKinnon's willingness to work on Krags. Quite unusual these days!

And here are a few pix I just received from Ed LaPour, Bremerton, WA gunmaker of the metalwork on the 98 Krag I'm going to be stocking later this year.
I'm going to miss something but as I remember; He concealed the rear screw hole and added a front receiver screw, the cover plate was thinned and an inletting draft added, magazine cut-off removed and the repro Rigby cocking piece sight added. It is off to have the receiver ring matted, then re-heat treat and then will be barreled with the Ralf Martini octagon to round, full length rib barrel I designed.
I am very pleased with Ed's work, he is a conscientious and thoughtful metalsmith who know how to think and plan way ahead.



Joined: Sep 2008
Posts: 465
WJL Offline
Sidelock
**
Offline
Sidelock
**

Joined: Sep 2008
Posts: 465
I've been resisting. I've always liked Krags and I've been particularly fond of that wonderful G&H Krag that keeps getting posted. But this is too much. Resistance is futile I guess I'm just going to have start looking for a Krag.

Jerry Liles

Joined: Dec 2001
Posts: 6,881
Sidelock
***
Offline
Sidelock
***

Joined: Dec 2001
Posts: 6,881
Nice work, who made the Rigby style peep sight?


MP Sadly Deceased as of 2/17/2014




Joined: Mar 2011
Posts: 4
Boxlock
Offline
Boxlock

Joined: Mar 2011
Posts: 4
Explain this double locking lug system please.

Gismo #224331 04/02/11 11:36 PM
Joined: Jul 2008
Posts: 448
Likes: 4
Sidelock
**
Offline
Sidelock
**

Joined: Jul 2008
Posts: 448
Likes: 4
Steve,

That's going to be one beautiful and unique rifle. Sure would like to see progress pics. And finished also!

Joined: Jan 2008
Posts: 704
Sidelock
**
OP Offline
Sidelock
**

Joined: Jan 2008
Posts: 704
Gismo, American Krags have a guide rib alongside the bolt that ends just short of the right side upward extension of the receiver. It a shows clearly on Steve Hughe's photos, above. On Norwegian and Danish Krags this rib extends further to the rear and fits against the receiver shoulder, forming a second locking surface, albeit it is not symetrical with the front lug. It is possible to alter a US Krag to lock up like this too. There are three methods. First, you can relieve the rear face of the bolt locking lug which lets the bolt go a bit to the rear. But this increases headspace so this method only works if you are rebarreling. It also can cut through the hardened surace on the back of the lug. Alternatively, you can weld up the front of the receiver shoulder. Disadvantage, risk of spoiling the receiver. Third method and the one I use, weld up the rear face of the guide rig. Disadvantage, spoiling the bolt, but Krag bolts, even brand new ones, are in good supply and out of perhaps half a dozen I have yet to ruin one. Another disadvanage is that if you shoot in the rain, your zero may change. I understand that for that reason Norwegian military rifle matches were shot on ranges with roofed firing lines.

Joined: Mar 2011
Posts: 4
Boxlock
Offline
Boxlock

Joined: Mar 2011
Posts: 4
Thanks. Thought that would be the method. I did custom barrel work for 35-40 years before health problems shut me down.

I always said that if I were limited to just one gun, a Krag in .30-40 would do me just fine for the sheer joy of that cartridge and action. The Lyman 311284 cast bullet and any variety of jacketed bullets if I were serious. Of course this would be with a nice new octagonal barrel and all the other nitpiking little improvements I would make.

Thanks again,
Gismo

Craigster #224495 04/04/11 01:21 PM
Joined: Jul 2005
Posts: 2,398
Likes: 16
Sidelock
***
Offline
Sidelock
***

Joined: Jul 2005
Posts: 2,398
Likes: 16
Originally Posted By: Craigster
Steve,

That's going to be one beautiful and unique rifle. Sure would like to see progress pics. And finished also!

Will be posted on my web site.

Joined: Sep 2008
Posts: 15
KVN Offline
Boxlock
Offline
Boxlock

Joined: Sep 2008
Posts: 15
That Rigby style peep sight is made by : Robert Zimmerman <rusty42marlin@yahoo.com>

Page 1 of 2 1 2

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack

Order or request info | Other Useful Information

Updated every minute of everyday!


Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.090s Queries: 36 (0.068s) Memory: 0.8400 MB (Peak: 1.8987 MB) Data Comp: Off Server Time: 2024-03-29 05:48:19 UTC
Valid HTML 5 and Valid CSS