|
S |
M |
T |
W |
T |
F |
S |
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums10
Topics38,463
Posts545,036
Members14,409
|
Most Online1,258 Mar 29th, 2024
|
|
|
Joined: Feb 2008
Posts: 2,023 Likes: 24
Sidelock
|
Sidelock
Joined: Feb 2008
Posts: 2,023 Likes: 24 |
Steve, What was done to provide for a front action screw? I presume the receiver ring was simply drilled and tapped. Is this correct? Thanks.
|
|
|
|
Joined: Jul 2005
Posts: 2,398 Likes: 16
Sidelock
|
Sidelock
Joined: Jul 2005
Posts: 2,398 Likes: 16 |
I'm not sure Bill, as I have yet to see any more than these photos? The rear screw hole was welded shut and drilled and rethread at a 90 degree angle, at my request.
|
|
|
|
Joined: May 2005
Posts: 174
Sidelock
|
Sidelock
Joined: May 2005
Posts: 174 |
SDH,
I was looking for photos on you web page of this Krag finished and couldn't find them. I am curious about how the front action screw was done also.
AKA garyg, depending on how confused and which computer Im on.
|
|
|
|
Joined: Jul 2005
Posts: 2,398 Likes: 16
Sidelock
|
Sidelock
Joined: Jul 2005
Posts: 2,398 Likes: 16 |
On hold currently and more things to do than time to do them...
|
|
|
|
Joined: Jun 2013
Posts: 9
Boxlock
|
Boxlock
Joined: Jun 2013
Posts: 9 |
I am in the process of building a Krag. My plan is to put a combination sight and hold down on the barrel. This mount will have 2 screwholes underneath for holding the barrel to the stock. The plan is to have a pillar embedded in the stock. This sightbase hold down combo is 2 inches long, but a simple hold down could be 3/8 long. Chasing the barrel threads down the barrel and adding a nut are my plan to pull this up against the reciever. I have a foto avalable of the finished sight base and drawing but am not sure how to attach them to reply.
|
|
|
|
|
|