March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Who's Online Now
6 members (FlyChamps, Argo44, SKB, Little Creek, 2 invisible), 790 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums10
Topics38,374
Posts544,010
Members14,391
Most Online1,131
Jan 21st, 2024
Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
#444080 05/13/16 10:30 AM
Joined: Dec 2008
Posts: 349
Likes: 2
redoak Offline OP
Sidelock
OP Offline
Sidelock

Joined: Dec 2008
Posts: 349
Likes: 2
I am interested in a British gun that the seller indicates has "marks" in the bores, but that the gun is still in proof.

Doesn't English proof place some limitation on pitting in the bores? Can someone help me understand how (or if) that relates to the pitting depth or severity?

Joined: Aug 2013
Posts: 666
Likes: 45
Sidelock
*
Offline
Sidelock
*

Joined: Aug 2013
Posts: 666
Likes: 45
No expert, but it sounds like it might fail the view portion depending on the severity if submitted for re-proof:

"‘View’ is a visual inspection by the Proof Master. If he thinks the barrels not sufficiently tight on the action, or he notices dents, pits or other faults, he will reject it as unsuitable for proof. If he considers it in good enough condition, it passes ‘view’ and goes on to be submitted for ‘proof’."

http://www.vintageguns.co.uk/articles/proof-law/

Joined: Jan 2006
Posts: 9,398
Likes: 307
Sidelock
***
Offline
Sidelock
***

Joined: Jan 2006
Posts: 9,398
Likes: 307
The Birmingham Proof House requires removal of pits prior to re-proof http://www.gunproof.com/Proofing/proofing.html
"Proof regulations require that shotgun barrels shall be 'struck-up' and smooth and that insides shall be clean. Pitting should be removed so far as is practicable, bulges knocked down and dents raised."

If the original bore was .729" it may "still be in proof" if honed to less than .740" (12/1). "Still in proof" does not necessarily establish the integrity of the barrels.


Joined: May 2005
Posts: 400
Likes: 29
Sidelock
Offline
Sidelock

Joined: May 2005
Posts: 400
Likes: 29
Drew,

Could you please explain the meaning of the numbers in parenthesis (12/1) in your last post?

Thank you


HWK
Joined: Jan 2006
Posts: 9,398
Likes: 307
Sidelock
***
Offline
Sidelock
***

Joined: Jan 2006
Posts: 9,398
Likes: 307
I'll let someone who actually understands British proofmarks wink
http://books.google.com/books?id=lvBk8df8PjUC&pg=PA139&lpg



So a bore between .729" and .739" (I think 18" from the breech?) would be marked '12', and if marked '12' would still be "in proof" if honed up to .739" (I think)

Joined: Feb 2012
Posts: 459
Likes: 12
Sidelock
Offline
Sidelock

Joined: Feb 2012
Posts: 459
Likes: 12
Originally Posted By: Drew Hause


So a bore between .729" and .739" (I think 18" from the breech?) would be marked '12', and if marked '12' would still be "in proof" if honed up to .739" (I think)


This is correct, except that it is 9" from the breech. It was done with a plug gauge. I quote from the 4th edition of the 'Notes on the proof of shotguns and other small arms' "At proof if a plug gauge of 0.729" diameter (but not one of 0.740") will enter the bore to a depth of 9", that barrel is at present marked .729" and under the 1925 Rules of Proof would have been marked 12 - and so on for the other bore sizes"

Whether this is 9" into the barrel strict, or barrel plus chamber - I believe is the whole assembly measured from the breech face.

Last edited by JohnfromUK; 05/13/16 02:22 PM.
Joined: Jan 2006
Posts: 9,398
Likes: 307
Sidelock
***
Offline
Sidelock
***

Joined: Jan 2006
Posts: 9,398
Likes: 307
Thank you for the clarification John...and it was in English wink

Joined: May 2004
Posts: 775
Likes: 35
Sidelock
***
Offline
Sidelock
***

Joined: May 2004
Posts: 775
Likes: 35
Whether a gun is in proof is simply a matter of whether the bore diameter has been enlarged beyond its stamped range. So if it is marked 12 it has to be between 0.729" and 0.739".
Also a gun can be taken out of proof by significant alteration of the barrels or action, eg. fitting of interchangeable chokes, conversion to ejector, weld repairs to the action etc.
Pitting, thin walls or poor jointing does not take a gun out of proof how ever bad they may be. Unsafe maybe, but not out of proof.
When a gun is sent up for proof, the proofmaster takes a view as to the safety of the barrels. If he doesn't like the amount or location of the pitting, he may fail it at view and return it for further work.
However, he may allow a gun with significant pitting to go through to the actual proof firing if he feels the gun is basically safe.
I have had guns pass proof with some pitting but I have also had guns fail with only a hint of rivelling.
There is very little apparent logic to the process in borderline cases.
And John is correct, the measurement is 9" from the breech face.

Last edited by Toby Barclay; 05/13/16 03:06 PM.
Joined: Jan 2013
Posts: 1,120
Likes: 191
Sidelock
***
Offline
Sidelock
***

Joined: Jan 2013
Posts: 1,120
Likes: 191
Here is a Birmingham Proof House inspection certificate from the 1970s for my Purdey 12 bore side by side, at that time you could send barrels for view inspection and report. Unfortunately they do not provide this service today so I have been informed. I hope you can see all of the relevant figures for bore size depth and limits.



The only lessons in my life I truly did learn from where the ones I paid for!
Joined: Dec 2001
Posts: 12,743
Sidelock
***
Offline
Sidelock
***

Joined: Dec 2001
Posts: 12,743
note that the "Between sizes are the average between two adjacent gauge sizes with decimal dropped to 3 places, not rounded. In the larger bores you take the difference between two adjacent gauges, divide by 3 & drop to 3 decimal places. Add to the smaller gauge once for the /1 size & twice for the /2 size.


Miller/TN
I Didn't Say Everything I Said, Yogi Berra
Page 1 of 2 1 2

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack

Order or request info | Other Useful Information

Updated every minute of everyday!


Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.084s Queries: 36 (0.054s) Memory: 0.8472 MB (Peak: 1.8987 MB) Data Comp: Off Server Time: 2024-03-29 00:21:39 UTC
Valid HTML 5 and Valid CSS