March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Who's Online Now
7 members (Ian Forrester, SKB, Marc Ret, eightbore, cpa, 1 invisible), 328 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums10
Topics38,374
Posts544,000
Members14,391
Most Online1,131
Jan 21st, 2024
Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
Joined: Sep 2013
Posts: 320
Likes: 4
WBLDon Offline OP
Sidelock
OP Offline
Sidelock

Joined: Sep 2013
Posts: 320
Likes: 4
Well one of these followed me home the other day and now I am totally perplexed and thought I would turn here for some possible answers.

I know there were updates (a recall)that are recommended on older guns with ser#'s prior to 30,000 (after which the factory automatically applied the updates). Here in lies my dilemma.... I have reviewed everything I can find on the net and I am still confused. Let me explain...

My gun has ser# OU 27xxx without the dot between the OU and 27XXX so it would appear it needs the updates BUT
It has the wreath around the roll stamp of the dog so it appears the updates were done at the factory. BUT
It is a two pin frame which indicates it needs the updates. BUT
It has a support at the rear of the upper and lower tang indicating it was updated. BUT
It doesn't have screws at the bottom of the recoil shield.
And finally there is a plate epoxied where the stock bolt goes into the action to strengthen (?) this area.

The gun is the skeet model with 25 1/2" barrels marked Skeet and Skeet but there is NO barrel code on the left side of either barrel, yet all markings are crisp and clean indicating it hasn't been refinished. It does have the R.E.P in an oval on both barrels (a proof mark I believe) also on the right side of the lower barrel it has 98 W PY (the PY may be the date code but that would make it 1974 adding more confusion as I don't think they were doing factory updates then and the roll stamped dog has a wreath around it).

On the bottom flat of the barrels is the Letter T a 3 and then a P with a Y away from the other 3 characters.

I am trying to get an idea if it needs the updates or not. As far as the forend issue I have disabled the ejectors (like extractors better) so I shouldn't have an issue with the forend cracking, hopefully. The gun is tight as a tick and has a few handling marks but fewer than you would expect, the bluing is in the 98 to 99% range and bores are mirrors. It has been used but not much and it has been babied......

Any help with the year of mfg. would be nice as well.....

Thanks much...
WBLDon

Joined: Feb 2002
Posts: 14,091
Likes: 192
Sidelock
**
Online Content
Sidelock
**

Joined: Feb 2002
Posts: 14,091
Likes: 192
If it doesn't have the hex nuts at the lower corners of the breech face, it hasn't been updated. The real information is available all over the internet. The update is so expensive now that you should forget about it.

Joined: Oct 2006
Posts: 879
Sidelock
**
Offline
Sidelock
**

Joined: Oct 2006
Posts: 879
Suggest you call Pat Laib in Minnesota. He's the the man for 3200's

Joined: Sep 2013
Posts: 320
Likes: 4
WBLDon Offline OP
Sidelock
OP Offline
Sidelock

Joined: Sep 2013
Posts: 320
Likes: 4
Thanks I will give him a call. WBLDon

Joined: Mar 2002
Posts: 7,693
Likes: 450
Sidelock
**
Offline
Sidelock
**

Joined: Mar 2002
Posts: 7,693
Likes: 450
I have a dozen 3200 and am not that worried about shooting one without the updates. The gun has functioned for 40 years as is. I would just shoot it as is and be done with it. I shot one without updates for well over 100k with zero problems. It did develope a small crack in the stock behind the tang but it never became greater than half an inch. Very solid guns. I'd rather shoot one like your than any gun with a release trigger.

I've never met a person first hand who had trigger problems with their 3200 but I am sure there could have been. 3200 are skeet guns which are only loaded when on the peg, pointed in a safe direction and quickly shot. If a problem happens just hold in a safe direction and open it up. If it were a field gun, carried loaded for hours a trigger problem might bother me more but it isn't. Save a grand on the updates unless you are going to shoot it enough to justify the expense.

Joined: Oct 2006
Posts: 879
Sidelock
**
Offline
Sidelock
**

Joined: Oct 2006
Posts: 879
My Dad was a Remington Director in the 3200 era. The Board was told that the reason for the recall/rework was to provide insurance against cowboys who snap-closed the gun. Don't know if that was the truth, but....

BTW, I really like my 3200's. A lot of gun for the money

Joined: Oct 2006
Posts: 2,260
Likes: 510
Sidelock
**
Offline
Sidelock
**

Joined: Oct 2006
Posts: 2,260
Likes: 510
I used a non-updated 32 hundy for about 5 years as my main duck gun...It was lights out and I should've never sold it. I now have an updated model that I also use as a duck gun, it too is lights out. I like the heft and robustness of these guns, always have. The safety-barrel selector is the best thing ever.

Joined: Mar 2011
Posts: 4,074
Likes: 441
GLS Offline
Sidelock
**
Offline
Sidelock
**

Joined: Mar 2011
Posts: 4,074
Likes: 441
Laib looked at my gun and did the upgrades he thought necessary which didn't include the Full Monty.

Joined: Sep 2013
Posts: 320
Likes: 4
WBLDon Offline OP
Sidelock
OP Offline
Sidelock

Joined: Sep 2013
Posts: 320
Likes: 4
Thanks for the input folks. Gonna shoot it and see how it goes... WBLDon

Joined: Feb 2002
Posts: 14,091
Likes: 192
Sidelock
**
Online Content
Sidelock
**

Joined: Feb 2002
Posts: 14,091
Likes: 192
Yup, only do what Pat Laib recommends and no more. The full restoration and update is way too expensive.

Page 1 of 2 1 2

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack

Order or request info | Other Useful Information

Updated every minute of everyday!


Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.068s Queries: 35 (0.047s) Memory: 0.8469 MB (Peak: 1.8987 MB) Data Comp: Off Server Time: 2024-03-28 16:04:33 UTC
Valid HTML 5 and Valid CSS