March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Who's Online Now
3 members (Jtplumb, Bob Jurewicz, SKB), 331 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums10
Topics38,373
Posts543,977
Members14,389
Most Online1,131
Jan 21st, 2024
Previous Thread
Next Thread
Print Thread
Page 16 of 18 1 2 14 15 16 17 18
Joined: Jan 2004
Posts: 6,663
Likes: 372
Sidelock
**
Offline
Sidelock
**

Joined: Jan 2004
Posts: 6,663
Likes: 372
Originally Posted By: Tinker
Brent that rifle is looking good.
The aperture sight looks shop made, pretty cool detail.

Describe the shooting performance. Maybe we can put our heads together and help you get it running right on the targets.

Have you slugged the bore?
What loads have you tried?
Which bullets?


I'll have to get my books and check but a gas checked cast bullet (>210 gr, "Krag bullet") and 5744, which I do not like at all. Just isn't accurate.

The aperture sight is a Pacific sight.

The barrel is in beautiful condition and an original barrel with the rear sight screw holes very carefully and artfully filled. I didn't know they were there until I discovered it was an original barrel and started looking real hard to find them.

It has been a while since I have shot this gun, so I can't quote more details without finding my books


_________
BrentD, (Professor - just for Stan)

[Linked Image from i.imgur.com]


Joined: Oct 2016
Posts: 284
Likes: 25
Sidelock
Offline
Sidelock

Joined: Oct 2016
Posts: 284
Likes: 25
Tinker, I never use a filler and the only time I have put anything above the powder was 1/16th of a sheet of Charmin 1/4 inch above 12 grains of Unique in a 45-70 (it didn't make much difference). The 30-40 was using Federal Large Rifle Match primers and I really should run it through the chronograph some time but I would guess somewhere just over 1600 fps.

Joined: Jan 2002
Posts: 2,168
Likes: 33
Sidelock
**
Offline
Sidelock
**

Joined: Jan 2002
Posts: 2,168
Likes: 33
Brent,

I'm in agreement with you concerning 5744. Not accurate in any loads that I've tried. I favor H-108, AA#9, 2400 and 4227 powders.
I have an original 1899 Krag Carbine that I've shot successfully at our local military bolt action matches using 20.5 gr. of H-108 with 168 match bullets.
I've shot 10 shot groups of 2" +- using the issue sights as required by the match rules. Unfortunately, I used up my last jug of H-108 (no longer available) but AA#9 compares favorably.
Lately I've been using 4227 for both jacketed and cast bullets with very good results. I don't use any fillers with the powders mentioned as they are not position sensitive.
A word of caution: the powder charges for those powders mentioned are very small volume wise. A double charge could be easily overlooked so care should be taken in the loading process.


Dodging lions and wasting time.....
Joined: Jan 2004
Posts: 6,663
Likes: 372
Sidelock
**
Offline
Sidelock
**

Joined: Jan 2004
Posts: 6,663
Likes: 372
Ken,
I have had severe powder position issues with 4227 in other cartridges. But tell me about 2400. I have some for a .38-40, but have not used it in anything else that I can think of. Someone posted 4198 = which sounds likely as well as 4895, perhaps? These seem to be less position sensitive than 4227 for me anyway.

I would really like a powder that fills the case easily, but that seems to be unlikely except for Trail Boss and I am not going there.


_________
BrentD, (Professor - just for Stan)

[Linked Image from i.imgur.com]


Joined: Jan 2002
Posts: 2,168
Likes: 33
Sidelock
**
Offline
Sidelock
**

Joined: Jan 2002
Posts: 2,168
Likes: 33
Brent,

I should clarify that my loads are not suggested for hunting applications. A lot better choices exist for that.

My loads are either for rifle matches or casual bench plinking sessions where bullet facing up cartridges are loaded into the rifles directly from the load block. That said I don't make any great effort to ensure the powder is positioned at the base of the brass.

I have used 2400 in .308, 30-06, 30-30, and 32-40 but my most accurate loads have been with H-108 or AA#9. 2400 is a few ticks faster than AA#9.

4227 is my go to powder for my 38-55 Hi Wall. I've also used it in my 32-40 Hi Wall with excellent results but the nod goes to AA#9 for best accuracy in that gun. As previously stated it's working well in the 30-40.

I've stayed away from using 4198 and 4895 just because I'm lazy and don't like the way they meter but undoubtedly they are excellent powders.

I've experimented with Trail Boss in .458's, 416's, 405's etc. Not a fan. Yes, you can fill up a case with it and the recoil is mild, but in my experience the accuracy is lacking.


Dodging lions and wasting time.....
Joined: Oct 2006
Posts: 721
Likes: 18
Sidelock
*
Offline
Sidelock
*

Joined: Oct 2006
Posts: 721
Likes: 18
I use both 2400 and 4198 in old straight walled cases. Both are great powders, with good accuracy. For the larger cases I prefer 4198 over 2400, as it gives less deviation for me.

Joined: Jan 2005
Posts: 948
Likes: 2
Sidelock
**
Offline
Sidelock
**

Joined: Jan 2005
Posts: 948
Likes: 2
Have you fellows run H4350 with the 220 grain cast bullets?
I'll be loading that powder with the Ideal 311-284 later this week.

Joined: Jan 2002
Posts: 2,168
Likes: 33
Sidelock
**
Offline
Sidelock
**

Joined: Jan 2002
Posts: 2,168
Likes: 33
Tinker,

I`ve never used H4350 for cast.
I do have a cache of H4350 that needs to used on something. I’d be interested in your results.

Thanks,
Ken


Dodging lions and wasting time.....
Joined: Jan 2005
Posts: 948
Likes: 2
Sidelock
**
Offline
Sidelock
**

Joined: Jan 2005
Posts: 948
Likes: 2
Ken I'll share my results.

Joined: Jul 2012
Posts: 4,445
Likes: 201
Sidelock
**
Offline
Sidelock
**

Joined: Jul 2012
Posts: 4,445
Likes: 201
Many years ago, Ed Harris wrote an article entitled " The Load", which works in most mid-capacity cartridges. His load was 13 grains of Red Dot behind most bullets appropriate for the particular cartridge. Many of my contemporaries used 12 grains of Unique in a similar fashion, but I have better results with "The Load". However, I often use a tuft of kapok tamped over the powder and Ed Harris specifically advised against fillers; so while I do it, I'm not recommending doing it.
Mike

Page 16 of 18 1 2 14 15 16 17 18

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack

Order or request info | Other Useful Information

Updated every minute of everyday!


Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.091s Queries: 35 (0.061s) Memory: 0.8625 MB (Peak: 1.8987 MB) Data Comp: Off Server Time: 2024-03-28 11:03:03 UTC
Valid HTML 5 and Valid CSS