|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
1 members (Jtplumb),
278
guests, and
5
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums10
Topics38,522
Posts545,769
Members14,419
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Dec 2011
Posts: 909 Likes: 43
Sidelock
|
Sidelock
Joined: Dec 2011
Posts: 909 Likes: 43 |
In my use of longer hulls in short chambers if the load is same pressure as the gun was meant to use I haven't seen the hull feathering you show. Some of the guns I have used these loads in include an English Hepplestone, a French Ideal, a between the wars Sauer with 65mm chambers and a 20 ga LC Smith with original 2 1/2" chamber. I'm not saying it doesn't happen just that if the load is correct for what the gun was originally made for I haven't seen it happen with longer plastic hulls. ymmv
|
|
|
|
Joined: Dec 2001
Posts: 3,964 Likes: 89
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 3,964 Likes: 89 |
When an old man dies a library burns to the ground. (Old African proverb)
|
|
|
|
Joined: Dec 2014
Posts: 906 Likes: 30
Sidelock
|
Sidelock
Joined: Dec 2014
Posts: 906 Likes: 30 |
Ive been shooting 2-3/4 "low pressure" handloads in short chambers for 20 years. 12ga. < 7000psi and 20ga at or < 7500psi. Loads are 1100-1150fps. All were/are Ithaca Flues and Crass guns. 1 Flues 20 and 1 Crass 12 were damascus. I have never had ANY issues with feathering cases and all killed just fine. The 20ga load with 800x is dirty though. YMMV.
Bill Johnson
|
1 member likes this:
eeb |
|
|
|
Joined: Jan 2002
Posts: 9,742 Likes: 97
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 9,742 Likes: 97 |
if there is a concern about shooting 2 3/4 shells in 2 1/2 guns, then why not just lengthen the chambers to 2 3/4?
keep it simple and keep it safe...
|
|
|
|
Joined: Jan 2004
Posts: 6,743 Likes: 436
Sidelock
|
Sidelock
Joined: Jan 2004
Posts: 6,743 Likes: 436 |
anyone got any hockey scores?
_________ BrentD, (Professor - just for Stan)
|
|
|
|
Joined: Mar 2002
Posts: 7,733 Likes: 492
Sidelock
|
Sidelock
Joined: Mar 2002
Posts: 7,733 Likes: 492 |
Removing metal always makes the barrels thinner in the chamber area. In what world is that a better option than shooting low pressure loads? Worse when you measure the chambers and find 2 3/4” shells fit but fail to consider your gun was meant to shoot 7-8,000 psi ammo and you drop 10-11,000psi in it. Shoot what it was designed to handle instead of what just fits and is convenient.
|
|
|
|
Joined: Jan 2002
Posts: 9,742 Likes: 97
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 9,742 Likes: 97 |
ky, there are one ounce 2 3/4 factory loads that develop pressures under 9000psi...why not shoot those...
also, 8000psi seems kinda low for most any 1 1/8 oz 2 1/2" load...
follow the 90 30 guide lines, shoot one ounce low pressure loads and you should be safe...
keep it simple and keep it safe...
|
|
|
|
Joined: Dec 2011
Posts: 909 Likes: 43
Sidelock
|
Sidelock
Joined: Dec 2011
Posts: 909 Likes: 43 |
What 1 oz factory loads are available. Can you guarantee 9000 psi?
|
|
|
|
Joined: Jan 2002
Posts: 13,173 Likes: 1159
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 13,173 Likes: 1159 |
What 1 oz factory loads are available. Can you guarantee 9000 psi? B & P Comp Ones. 8000 psi range, as reported by B & P.
May God bless America and those who defend her.
|
|
|
|
Joined: Jan 2002
Posts: 9,742 Likes: 97
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 9,742 Likes: 97 |
on this, stan and i agree...bp comp one loads are wonderful...
keep it simple and keep it safe...
|
|
|
|
|
|