S |
M |
T |
W |
T |
F |
S |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
4 members (WBLDon, eeb, 2 invisible),
496
guests, and
1
robot. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums10
Topics38,900
Posts550,592
Members14,458
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Dec 2023
Posts: 9 Likes: 1
Boxlock
|
OP
Boxlock
Joined: Dec 2023
Posts: 9 Likes: 1 |
Change of subject, but any of you that live in NC, where’s a good place to go bird hunt? I got into dove a few years ago and it’s quickly become my favorite type of hunting but finding a good field has become quite the task. Game land hasn’t been great but about my only option. Also, I’d like to give every other bird a shot at hunting. The only other one I’ve tried is Turkey but I wanna shoot at moving targets!
Porkskins
|
|
|
|
Joined: Feb 2002
Posts: 1,578 Likes: 32
Sidelock
|
Sidelock
Joined: Feb 2002
Posts: 1,578 Likes: 32 |
Question on your problem. Do the ejectors work if you dry fire and gun and open the action? If they don't then I'd expect the ejector springs have been removed. Also FWIW, while not rare, ejectors in Sterlingworths are the not the norm. Only 10 percent of the Sterlingworths sold had ejectors. Just to confirm you have ejectors, does your gun have an escutcheon on the bottom on the forearm. Ejector guns did.
foxes rule
|
|
|
|
Joined: Dec 2023
Posts: 9 Likes: 1
Boxlock
|
OP
Boxlock
Joined: Dec 2023
Posts: 9 Likes: 1 |
Yes the ejectors “work” if I dry fire. I’m going to try the diff brand of shells suggested before I pay to take it anywhere. I’ve only shot lower powered stuff because that’s what my dad advised, rst I think but don’t hold me to that
Porkskins
|
|
|
|
Joined: Jan 2002
Posts: 13,375 Likes: 1318
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 13,375 Likes: 1318 |
Something else to check ....... see if your chambers are rough from corrosion or shell contaminant buildup. When I shot high volume in Argentina my chambers would get plastic residue built up to the point that it would make for weak, even no, ejection. A few brisk passes with an oversized chamber brush would restore perfect ejection.
May God bless America and those who defend her.
|
|
|
|
Joined: Mar 2011
Posts: 4,118 Likes: 524
Sidelock
|
Sidelock
Joined: Mar 2011
Posts: 4,118 Likes: 524 |
Mike, I'd be cautious about grease migration past the primers into the powder. Maybe application on just a few shells, but only as you indicated on the sides of the hulls. While not the same as a oil based lubricant, it might not be inert regarding gun powder. I am aware of incidents involving application of lubricants on brass rounds that messed up a lot of ammo. Gil
|
|
|
|
Joined: Dec 2023
Posts: 9 Likes: 1
Boxlock
|
OP
Boxlock
Joined: Dec 2023
Posts: 9 Likes: 1 |
Something else to check ....... see if your chambers are rough from corrosion or shell contaminant buildup. When I shot high volume in Argentina my chambers would get plastic residue built up to the point that it would make for weak, even no, ejection. A few brisk passes with an oversized chamber brush would restore perfect ejection. Fortunately this is one is in pretty dang good shape. Bores and chambers are free of any rust or pitting. Has a good amount of the case hardening remaining and the only thing I can find wrong aside from the ejectors is the original owners name engraved on the trigger guard
Porkskins
|
1 member likes this:
Stanton Hillis |
|
|
|
Joined: Mar 2011
Posts: 4,118 Likes: 524
Sidelock
|
Sidelock
Joined: Mar 2011
Posts: 4,118 Likes: 524 |
Change of subject, but any of you that live in NC, where’s a good place to go bird hunt? I got into dove a few years ago and it’s quickly become my favorite type of hunting but finding a good field has become quite the task. Game land hasn’t been great but about my only option. Also, I’d like to give every other bird a shot at hunting. The only other one I’ve tried is Turkey but I wanna shoot at moving targets! An old saltwater fisherman showed me a photo of a nice catch of sea trout and redfish. "Sonny, did you catch them at Eagle's Nest?" "No, at Cat's Neck." "Where's that?" "About 14" from his butthole.". Don't expect a heads up on someone's bird hunting spot on a public forum, other than a preserve, if they have a lick of sense. Gil
|
3 members like this:
Porkskins79, Ken Nelson, Geo. Newbern |
|
|
|
Joined: Feb 2002
Posts: 1,862 Likes: 163
Sidelock
|
Sidelock
Joined: Feb 2002
Posts: 1,862 Likes: 163 |
In the following, I'm assuming that when you say the 'Ejectors work when the gun is dry fired'..that means they snap when the gun is opened, But, that you do not have any fired cases or snap caps in the chambers.
This is all about the timing of the Ejectors release..so it may not even apply.
The Ejectors may be releasing a bit early. When that happens, you hear them snap, but the rim of the fired hull is not totally clear of the standing breech. So the bottom edge of the fired hull strikes the top edge of the standing breech upon ejection and goes no where. It pops right back into the chamber.
Opening the gun very slowly after dryfiring with a snap cap or fired hull in place you can sometimes actually see the early release of the ejector and the hull strike the standing breech instead of launching over it.
Put the bbl's in a padded vise helps and gun horizontal when you do this helps even more as you can use 2 hands to slowly and with control open the breech by lowing the action and watch the (dry) fired hull being lifted and then ejected,,and at what point.
If that is the problem, the Ejector can be made to release a bit later by adjusting the Ejector Sear in the forend. It takes a very tiny amt of change to effect what you need.
> Another problem of why the Ejector snaps too early may be a weak Ejector / Ejector Sear engagement , These two parts have a squared 'sear engagement' much like a trigger mechanism. If one or both parts is worn or has been worked over in attempts to change or somehow improve the Ejector timing, that Engagement my be less than secure. If it was a trigger,,some would use the term ' hair trigger' to describe it
The parts are hardened, Case Hardened usually. Don't try bending the Ejector Sear. But if the engagement is weak, the angle off...just like with a trigger, it doesn't take as much pressure to release it. So when the gun is opened the Ejector Sear is push out of enagement with the Ejector (Kicker) too quickly and the early release of the Ejector occurs.
Might not be the problem,,but a couple things to check for
|
3 members like this:
Porkskins79, Stanton Hillis, NCTarheel |
|
|
|
Joined: Feb 2002
Posts: 1,578 Likes: 32
Sidelock
|
Sidelock
Joined: Feb 2002
Posts: 1,578 Likes: 32 |
In the old days, 0000 steel wool wrapped around a copper cleaning brush with a splash of oil, secured to a aluminum cleaning rod section and put in a drill and spun, just to clean up the chamber area. I'll bet its dirty with old grease and dried powder and rough as a old corn cob.
foxes rule
|
|
|
|
|