Register Log In

doublegunshop.com - home Forums General Discussion DoubleGun BBS @ doublegunshop.com Adding a Butt Spacer a DIY Job?

May
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

0 members (), 380 guests, and 6 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics38,520

Posts545,762

Members14,419

Most Online1,344
Apr 29th, 2024

Print Thread

Re: Adding a Butt Spacer a DIY Job? yobyllib #153052 07/01/09 10:07 PM
Joined: Feb 2006 Posts: 1,600 Likes: 13 Massachusetts, USA DAM16SXS Sidelock
DAM16SXS Sidelock Joined: Feb 2006 Posts: 1,600 Likes: 13 Massachusetts, USA	Instead of a freehand mitre saw to cut length I use a table saw with a jointer blade for an ultra-fine cut. I use a spacer under the head of the stock to be sure of the 90 degree angle and adjust the angle of the T-slide for the angle of pitch. Again, proceed very slowly but always firmly.

Entire Thread
Subject	Posted By	Posted
Adding a Butt Spacer a DIY Job?	UpInMichigan	07/01/09 01:26 AM
Re: Adding a Butt Spacer a DIY Job?	Jim Legg	07/01/09 03:46 AM
Re: Adding a Butt Spacer a DIY Job?	DAM16SXS	07/01/09 10:06 AM
Re: Adding a Butt Spacer a DIY Job?	bill schodlatz	07/02/09 12:57 AM
Re: Adding a Butt Spacer a DIY Job?	yobyllib	07/02/09 01:36 AM
Re: Adding a Butt Spacer a DIY Job?	DAM16SXS	07/02/09 02:07 AM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.394s Queries: 18 (0.374s) Memory: 0.7962 MB (Peak: 1.8992 MB) Data Comp: Off Server Time: 2024-05-12 20:37:03 UTC
Valid HTML 5 and Valid CSS