Had a overwhelming supply of 1 1/4 oz wads and plenty of time on my hands so decided to try to make them work for 1 1/8 oz loads. First made a short shell plate out of two RCBS shell holders. They fit perfectly in the 12 ga slot on the MEC base plate and are exactly 1/4 in tall when the base is ground off. Cut down some AA hulls and loaded them up with the 1 1/4 oz wads using 1 1/8 oz shot. No other adjustments were done. Pile of wads is getting smaller after every trip to the range now. I did add a bar between the spacers to keep them from moving












Last edited by 12brd; 09/03/19 12:21 PM.