Register Log In

doublegunshop.com - home Forums General Discussion German & Austrian Sporting Guns @ doublegunshop.com Which Least Expensive Bench Lathe ??

April
S	M	T	W	T	F	S
	1	2	3	4	5	6
7	8	9	10	11	12	13
14	15	16	17	18	19	20
21	22	23	24	25	26	27
28	29	30

Who's Online Now

5 members (smlekid, Kolar Dickson, canvasback, SKB, 1 invisible), 1,252 guests, and 5 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics38,469

Posts545,143

Members14,409

Most Online1,319
Apr 27th, 2024

Print Thread

Which Least Expensive Bench Lathe ?? #596714 05/08/21 08:33 PM
Joined: Mar 2013 Posts: 67 Likes: 1 Ohio ohiochuck OP Sidelock
OP ohiochuck Sidelock Joined: Mar 2013 Posts: 67 Likes: 1 Ohio	Which Least Expensive Bench Lathe ?? I am interested in taking .22 Hornet new cases (WW) and turning the original rim thickness down on a lathe to 1.4 mm (.055") working from the chamber side not on the bottom side. This would be for use in my 22 Vierling (5.6 X 35 rimmed) drilling. Need an easy to use lathe, if there is such an animal Thanks! Jim

Entire Thread
Subject	Posted By	Posted
Which Least Expensive Bench Lathe ??	ohiochuck	05/09/21 12:33 AM
Re: Which Least Expensive Bench Lathe ??	Der Ami	05/09/21 03:01 PM
Re: Which Least Expensive Bench Lathe ??	craigd	05/09/21 11:26 PM
Re: Which Least Expensive Bench Lathe ??	Der Ami	05/10/21 03:54 PM
Re: Which Least Expensive Bench Lathe ??	PhysDoc	05/10/21 01:39 AM
Re: Which Least Expensive Bench Lathe ??	journeymen	05/10/21 01:34 PM
Re: Which Least Expensive Bench Lathe ??	PhysDoc	05/10/21 03:58 PM
Re: Which Least Expensive Bench Lathe ??	Kutter	05/12/21 11:23 PM
Re: Which Least Expensive Bench Lathe ??	Der Ami	05/13/21 12:59 PM
Re: Which Least Expensive Bench Lathe ??	bushveld	05/13/21 10:50 PM
Re: Which Least Expensive Bench Lathe ??	Der Ami	05/14/21 12:06 PM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.390s Queries: 16 (0.371s) Memory: 0.8101 MB (Peak: 1.8992 MB) Data Comp: Off Server Time: 2024-04-27 12:34:31 UTC
Valid HTML 5 and Valid CSS