Register Log In

doublegunshop.com - home Forums General Discussion German & Austrian Sporting Guns @ doublegunshop.com Which Least Expensive Bench Lathe ??

April
S	M	T	W	T	F	S
	1	2	3	4	5	6
7	8	9	10	11	12	13
14	15	16	17	18	19	20
21	22	23	24	25	26	27
28	29	30

Who's Online Now

1 members (Hugh Lomas), 1,156 guests, and 6 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics38,469

Posts545,145

Members14,409

Most Online1,335
Apr 27th, 2024

Print Thread

Re: Which Least Expensive Bench Lathe ?? ohiochuck #596745 05/09/21 07:26 PM
Joined: Feb 2009 Posts: 7,463 Likes: 212 craigd Sidelock
craigd Sidelock Joined: Feb 2009 Posts: 7,463 Likes: 212	If there is enough web in your brass, maybe you could just take it off the primer side anyway and recut the pocket with a uniformer? I've jigged up this type of task a bunch of times to use regular handtools and you might check your fit as you may not need to get all the way down to .055. Only thoughts, good luck with it. Last edited by craigd; 05/09/21 07:30 PM. Reason: spelling

Entire Thread
Subject	Posted By	Posted
Which Least Expensive Bench Lathe ??	ohiochuck	05/09/21 12:33 AM
Re: Which Least Expensive Bench Lathe ??	Der Ami	05/09/21 03:01 PM
Re: Which Least Expensive Bench Lathe ??	craigd	05/09/21 11:26 PM
Re: Which Least Expensive Bench Lathe ??	Der Ami	05/10/21 03:54 PM
Re: Which Least Expensive Bench Lathe ??	PhysDoc	05/10/21 01:39 AM
Re: Which Least Expensive Bench Lathe ??	journeymen	05/10/21 01:34 PM
Re: Which Least Expensive Bench Lathe ??	PhysDoc	05/10/21 03:58 PM
Re: Which Least Expensive Bench Lathe ??	Kutter	05/12/21 11:23 PM
Re: Which Least Expensive Bench Lathe ??	Der Ami	05/13/21 12:59 PM
Re: Which Least Expensive Bench Lathe ??	bushveld	05/13/21 10:50 PM
Re: Which Least Expensive Bench Lathe ??	Der Ami	05/14/21 12:06 PM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.440s Queries: 17 (0.421s) Memory: 0.8065 MB (Peak: 1.8992 MB) Data Comp: Off Server Time: 2024-04-27 15:18:07 UTC
Valid HTML 5 and Valid CSS