Right now, the reticule is in"dead center"-- I will CAREFULLY dial down to dead stop the elevation knob,counting carefully the clicks- then again Carefully raise the dial back UP 1/2 the number of clicks it took to bottom it out-- Interesting, as I though a shim would need to be placed in the bottom radius of the mounting ring, but the group seems to endorse placing it on the bottom of the mount, where it sits on the radius of the receiver--That might present a small problem, as I used a drop of Blue Loctite on the machine screws for each mounting ring--however, I applied the Loctite on the top of the screw head, and not into the D&T holes in the receiver of the rifle. Parabola-- a Warner and Swasey scope on a '.303 Ross rifle- sounds a bit like a Canadian set-up, am I correct? I know Warner & Swasey, as I know LeBlond, Cinncinati, Brown&Sharpe, Lufkin, Starret, Bridgeport, Atlas, and all the other great names in American Machine Shop operation- "back in the day"-- RWTF
